(800) 853-2651
SHOP NOW

Recent content by Dick Binfield

Yesterday's Tractor Forums
  1. D

    Farmall M with duals

    In the late 60's we used an M with Duals(cast wheels dished in/ dished out which allowed the tractor to ride the top of the ridge when we go-digged row crop corn. Great traction. The rear tires we not the same size, the inside were somewhat smaller. The go-dig was two point and was a Haberlin...
  2. D

    Behlen Power Steering Pump

    I have an M with a Behlen PS pump which sits bolted to the live hydraulic pump off the distributor. It appears that the PS pump has bad seals. Where could I look for a kit for this pump? The other option would be to utilize some other pump( automotive PS type off the crankshaft)but what vintage?
  3. D

    M carb float issues

    I did install a new needle and seat.I used carb cleaner and blew it out with air and pressurized kennesol(like brake cleaner). I will check the seat orifice and blow it out again. Thanks
  4. D

    M carb float issues

    I recently put a kit in my M carburetor(IHC). I soldered a tiny hole closed on the float and set it to the specs according to the measuring device in the kit.Initially it ran pretty decent but recently would not start.The float hangs up because the bowl fills with gas and runs into the tube of...
  5. D

    M carb float issues

    I recently put a kit in my M carburetor(IHC). I soldered a tiny hole closed on the float and set it to the specs according to the measuring device in the kit.Initially it ran pretty decent but recently would not start.The float hangs up because the bowl fills with gas and runs into the tube of...
  6. D

    Wheel paint color

    I have used Rustoleum Aluminum and Rustoleum Navy Gray and had a pretty decent combination and it seems to wear well(about 20 years)and still looks good. I have also used the IH Silver Argent which has more gloss that the Rustoleum combination. The jury is still out on durability of Silver Argent.
  7. D

    sickle mower IHC drawbar style mounted in place of drawbar

    My son has an H with a drawbar mounted sickle mover. The one way cylinder on the left side ahead of the axle housing that raises the mower has blown its seals. Are there any parts available for those cylinders? Are there any cylinders around?
  8. D

    mounting F11 on M

    I am mounting a F11 on an M. I noticed that the nose of the tractor is off to the left side of the loader. Upon looking at the angle braces which bolt to the frame channel I noticed the left side angle is an inch shorter than the right side. To center up the loader on the frame I need to...
  9. D

    SpeeCo wide front for M?

    Its A & I Products web site
  10. D

    SpeeCo wide front for M?

    looks the same as the Schwartz that I bought a while back. You can go to A & I in Iowa on the web for some diagrams for parts
  11. D

    M W live hydraulics pump what make distributor

    I have a 41 M with a live pump and a Delco distributor that is a 90 degree arrangement which points toward the hood. It is a lot different from the stock distributor which was positioned straigt away from that housing and pointing to the rear of the tractor
  12. D

    mounted cultivator for an H or M

    Is it a 238? It looks similar to some iron we have as part of our 2 row equip 40 some years ago
  13. D

    wide front smta

    What comes with a short turn kit? Where are they available. I live in south central NEBR
  14. D

    M six bolt hubs and bearing caps

    I recently purchased some 6 bolt hubs from Walts tractor.com. for my M wide front. I think I can use the bearing caps from the cast hubs presently on the wide front end. I got a part number from an IH parts manual for gaskets that supposedly fit the M bearing caps and the 6 bolts and purchased...
  15. D

    Air in power steering system of 856

    My nephew replaced some hoses on a dozer blade and apparently got some air in the hydraulic system that made its way to the power steering cylinder. The wheels do not move either way. How can I go about getting the air out of that system?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top