-
Ddocmirror replied to the thread Hyd steering help.I think we'll forget the loader plan. I have an old Ford with a loader we can get by with. Steering is working well now. The hyd...
-
Ddocmirror replied to the thread Hyd steering help.OK, it's a model 245 with diesel 3 cyl. We were able to get it bled pretty easy. It has the reservoir on the right side driven by the...
-
Ddocmirror replied to the thread Hyd steering help.I'll go back down to the airport and get the model number. I used to use the turn lock to lock method on older cars with the canister...
-
DOK, this really isn't an antique or even vintage tractor. We have a MF from around 1990. It has hydraulic only steering. That is, there...
-
DSince 65/later Ford tractor engines are parent bore blocks, anything other than a simple hone and rering will require pulling the engine...
-
Ddocmirror replied to the thread Ford 4600-write it off?.I've gone the repair seized engine twice now. While it's worth it in the long run if done 'in frame', the cost and time are significant...
-
Ddocmirror replied to the thread 1950-51 8N whim purchase **OH BOY! IM IN TROUBLE**.That list is a very good start. I think if you get those items done, you're going to have a good running 8N. I started with an 8N about...
-
Ddocmirror replied to the thread How do I upgrade to electronic ignition? 1959 Farmall 140.The Hall effect voltage is very low. There is a hi gain amp embedded in the potted block, but still - the system is susceptible to even...
-
Ddocmirror replied to the thread Farmall M Trojan Road Grader.Nice find Ed, thanks for offering up whatever info can be found. Not sure about the 'highly prized' by collectors, but at least a few of...
-
Ddocmirror replied to the thread Farmall M Trojan Road Grader.Update an old thread. I found one in N TX that's in rough shape. It's been sitting for 30 years but it's not seized! I may grab it up if...
-
Ddocmirror replied to the thread T20 fergie,hard steering.What is "rotella t 10"? If it's 10 weight, that is too thin. 30wt winter, 40wt summer.
-
Ddocmirror replied to the thread T20 fergie,hard steering.Yes, any of the 10Si alternators will work fine. Does not need to be 100 amp, if 60 or 36 amp will work find if it's cheaper.
-
Ddocmirror replied to the thread Caterpillar Grader 112.I run an Allis Chalmers D grader with no brakes. Never had them. Just drop the blade a bit.
-
Ddocmirror replied to the thread T20 fergie,hard steering.I have a TO-20 and it steers fairly easy. I'd say the steering box or spindle bearings need looked at. Shouldn't need a PS kit for this...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy