Recent content by Don M Wis

  1. D

    850 Pertronixs conversion issues ?

    I bought the 3.0 flame thrower epoxy coil which which replaced the Flame thrower oil filled 3.0
  2. D

    850 Pertronixs conversion issues ?

    I did see on some of the newer Pertronix ignitions the key may be left on ? not taking any chances ! LOL Thanks Soaked !
  3. D

    850 Pertronixs conversion issues ?

    Soaked ,wow talk about timing you stated fuel ? After i posted this i went outside looked at the tractor and tweaked the carb turned out the big jet 1/4 turn out and turned out the small jet out 1/8 turn and now not stumbling at all . This was from 2 turns out from bottom on both jets . Mowed...
  4. D

    850 Pertronixs conversion issues ?

    On my 3rd Pertronix ignition . 2nd one lasted over 10 years . I replaced Pertronix coil with a epoxy filled Pertronix , replaced 1244A with a new 1244a Pertronix ,new rotor and distributor cap new ngk plugs gapped at .030 Fired up ran good hooked up mower ran less than 10 min. started to sputter...
  5. D

    ford 850 Clutch disc?

    Its unanimous! thanks don
  6. D

    ford 850 Clutch disc?

    Pulled pressure plate and disc fell out,not sure which way new disc faces on install? Thanks Don
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top