Recent content by DPatter888

  1. D

    Ford 3000 gas starter

    Thanks for the reply’s. I’ve got to take it out. While I hope it’s not a ring gear issue, at least that would be conclusive. I’ll post back as I work on it.
  2. D

    Ford 3000 gas starter

    No. I think it might have been a bendix issue. They are a good old electric motor shop. The type that has the old man with 100 years experience. Lol. I had already gotten an Amazon one to tide me over.
  3. D

    Ford 3000 gas starter

    I took my original starter in. The shop said it was not repairable. Is there a place to buy a good one?
  4. D

    Ford 3000 gas starter

    Has anyone had trouble with the cheaper Amazon starters? Mine hits and misses sometimes. It doesn’t engage like the ring gear has a bad spot. If I roll or rock the tractor it will eventually hit. I’m going to take it off and look at the ring gear sometime but was curious if like other cheap...
  5. D

    Steiner carb?

    It runs well under load. The miss is only at idle. You are correct, it will be fine. But I’m just trying to get it as smooth as possible. It’s tired but will be a few years before I restore it. The bad spot on the flywheel is my only real issue right now. It sure is annoying. :)
  6. D

    Steiner carb?

    I just installed a cheap Amazon carb on my 1969 ford 3000. Runs pretty good. Has a slight miss but if you choke it a little it comes out of it. Old mechanics said I’m starving it for fuel. Needs a bigger jet. Are the more expensive carbs from Steiner better?
  7. D

    69 ford 3000 gas miss at idle

    Can a factory original carb be purchased (or rebuilt) or am I stuck with the $50 amazon ones? The Holley carb on it was damaged and had JB weld holding it together. Need to put a bigger jet in the carb or know what size it needs to be. I have machinist friends that could open it up.
  8. D

    69 ford 3000 gas miss at idle

    Adjusting the valves is on the agenda. I’m sure this poor old tractor is worn out. It will get a frame up restore in a few years. But for now I’d like keep her going. I’ll get a valve cover gasket ordered and find someone to help me. I’m afraid to do a compression test lol
  9. D

    69 ford 3000 gas miss at idle

    My tractor seems to have a slight miss at idle. When it’s under load it runs great. Have converted to solid state, new carb, plugs, wires, etc…. An old mechanic said that if it clears up with a little choke that the carb needs to be a little richer. I got a carb off amazon and seems to work...
  10. D

    69 ford 3000 bush hog

    13.8 x 28 I believe.
  11. D

    69 ford 3000 bush hog

    I think a bunch of it was the top link was too long. I’m going to try it again though.
  12. D

    69 ford 3000 bush hog

    Has anyone added on of those quick hitches on an old tractor like this?
  13. D

    69 ford 3000 bush hog

    Ok. I’ll take a picture next time. I didn’t have my phone with me. Yes top link was a little long but I was away from the house and didn’t have my shorter one. Thinking of geometry…. I think a shorter length would have helped but no fixed it. The generic king kitter doesn’t have any other...
  14. D

    69 ford 3000 bush hog

    Was going to try my bush hog out tonight. It’s a king kutter 6 footer. When I lifted it, it hit the tires. Do these old tractors need a special style of bush hog?
  15. D

    1969 ford 3000 draft control?

    I have a 1969 ford 3000 gas. How does the draft control work? Since my grandpa and uncle have passed away, I really have no one to ask. The easy answer is which way should the lever be? Up or down? I use this tractor to grade the driveway and bush hog. While I have a 2 bottom plow, I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top