(800) 853-2651
SHOP NOW

Recent content by DWalsh

  1. D

    more lit pics

    Plowed many acres with 930 and 5/16 semi mount in 5th gear but had torque topper (lp) for tuff spots. Went to 6/16 on land and dropped to 4th and plowed as much per day. Went to 1030 in 4th which ran a mph faster and handled same as 930 with torque topper. Used same plow on 1070 in transation...
  2. D

    Case 730

    Have a 800 gas that I put in an after market 4.125 set in 20+ years ago and done a little cleaning up on value passages and heads. Had to drill out the jets a couple of times to get enough fuel. Sure made a feed grinding tractor out of it. I also put a JD 4020 diesel starter on it and with...
  3. D

    Dumb 1175 question

    We had a 74 white one and ran 18.4 tires in 30" rows for 12 years with no problems. Cultivated, sprayed, and put on anhydrous with no problems. It had the rims and not the steel pressed wheels as case nutty's has. Dan
  4. D

    2470 weight

    We have 4 case ingersol garden tractors and a vac, sc, dc, 800, 930, 1030, 580, 1370, 2290, and 9130 and basically only use the 580, 1370, 2290, and 9130. Some of others might only be started 2 or 3 times per year so we are not in the habit of scraping things not being used. I would be more...
  5. D

    2470 weight

    We are located in north central Indiana and have taken most of the usable parts off of it. There just doesn't seem to be a demand for the remaining parts and we need to get it gone. Anything that anyone wants shoot me an e-mail. Dan
  6. D

    2470 weight

    Does anyone know how much a 2470 carcass less engine weight. Have one to scrape out junk transmission and replaced with 9130. Sure hated to lose and 4 wd with pto. Dan
  7. D

    1370 Transmission - What to do???

    I would be interested in the door if not prohibitive to get it to Indiana. shoot me an email
  8. D

    730 questions

    I think if eagle hitch the tranny and hydrolic are NOT the same oils. Tranny 90 wt and hydrolic hy-tran.
  9. D

    1030 brakes

    Another way to help them is to increase the leverage by hooking the brake pedal rod in the top hole where the return spring is hooked. Put a chain link in the clevis so you can hook the spring back up. Works very well and doesn't require as much pressure on the pedal. Dan
  10. D

    Parting out 1030

    The hood front end and screens only fit the 1030 correctly. The hood and front end each are 1.5 in longer than the 930.
  11. D

    case 930 ck pto

    There is a plate with 3 bolts on the upper right side of the housing that needs to be removed to adjust it.
  12. D

    case 1030

    You will want to use a dyano as to much fuel on a NA power cell engine can cause a drop in HP. We have pulled a NA 1030 for years on percentage and it is very hard to beat.
  13. D

    VAC hydralic

    I just got one for my son"s VAC at a local cylinder repair shop for $30.00. The O rings won"t work.
  14. D

    1175 puller on ebay

    Does anyone know if the 1175 puller on ebay sold and how much did it bring?
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top