Recent content by Eastfork

  1. E

    Re: 4430 Trans pump

    My number is 720-402-4543. Thanks
  2. E

    Re: 4430 Trans pump

    Sorry I thought the previous post would show up. The hydraulics chatter for a few seconds and then run as normal. The trans pump was changed out last year (quadrange with external pump) which solved it for a while but slowly came back. The filter and screen are clean. The oil has some fine...
  3. E

    4430 Trans pump

    Hey Tim. I finally checked pressures and got 180psi on the test ports and 2250 on the outlet. None of the test ports changed with doing different functions.
  4. E

    4630 brake pads

    Just curious guys, I had the dealer install new brake pads on my 4630 and I dropped off the plates at their shop. They charged $900 in labor to take off the old pads and install the new ones. Does that seem a little high? They put on the new non-asbestos pads.
  5. E

    4630 pinion

    You must be talking about a quad range pinion? I have a powershift and there is no snap rings. Thanks for the reply and I think I'm going to go with "measuring end play" route. Have you heard of using .080 worth of shims before? The other problem I have is no access to a 3/4" torque wrench...
  6. E

    4630 pinion

    Hi guys, I posted a while back about rearend noise on a 4630 and 2 guys guessed the right answer of a bad pinion bearing on the front side. It was bad enough to where I had to cut it off the pinion to get it out (what a mess). Now I'm in the process of getting it back to together with a used...
  7. E

    4630 Trans noise

    Yesterday I had a hydraulic oil cooler return line blow underneath the cab while driving it home and went unnoticed for about 12 miles pulling a haybine. Apparently they only lose about 10 gallons and still keep running. I got it fixed and went down the road a bit and now the trans has a bad...
  8. E

    4430 Trans pump

    Thanks Tim. I'll round up some gauges and a service manual hopefully in a few weeks. I'll let you know what I get for readings.
  9. E

    4430 Trans pump

    About a year ago I had the trans pump replaced on my 4430. The tractor hydraulics chattered bad and with the help from you guys and the JD dealer it was perfect afterwards (just a half second delay when I pulled the lever). They were surprised it even worked at all as bad as it looked...
  10. E

    4630 serial number

    I have a 4630 with serial #11717 and according to the chart I found, its the first one of 1975. Can anyone confirm that and is there any value to that or is it just another tractor?
  11. E

    Toys for Agri-King

    Here is the Case and Deere set of battery powered stuff. I included my Conrad cases and a cool HO scale semi made by Ertl a while back.
  12. E

    Case 4994

    They made a slurry spreader and dump wagon in red for the case and a push spreader and dump wagon in green for the battery powered 8970 John Deere. If anyone wants to see them I can dig them out and snap some pics.
  13. E

    some pics

    Mine has the live pump on the mag too. If anyone is interested I would sell the loader or trade the tractor and loader for a different model D.
  14. E

    some pics

    Got the herd out to clean to shed. Does anyone else have a cast lever for the hydraulics instead of flat stock? I"ve haven"t seen any others. Either its not correct or I have the wrong dash because the mounting holes don"t all line up.
  15. E

    Vac with T6

    Yeah! I don't know what happened. I posted with my iPhone and it appears normal on the forum but when I check my computer it's sideways.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top