Recent content by Ed_F

  1. E

    glass fuel sediment bowl replacement

    If all else fails, go to tractorhouse.com They have 75ea Ford 3000's listed in salvage in their dismantled machines section.
  2. E

    glass fuel sediment bowl replacement

    Go to ebay and do a search for "Ford Tractor Fuel Sediment bowl". There are many available.
  3. E

    What year and model is my tractor

    I was up early this morning, looking for something to do. But one has to get up early to beat Ultradog!!
  4. E

    What year and model is my tractor

    Sorry, I had a brain fart. Your serial number is consistent with 1969 manufacture, not 1968 as stated above. Serial numbers for year 1969 started at approximately 226000 and ended at about 257600.
  5. E

    What year and model is my tractor

    Your tractor data plate translates as follows: Model C5011F: C50 - Ford 3500 Industrial tractor. 1 - Diesel Engine. 1 - No PTO. F - 4x4 Torque Converter transmission, auto reversing. Tractor Assembly Date 9E05B: May 5th, 1969. Day shift. Engine assembly date 8M18B: December 18th...
  6. E

    850 Temp is getting hot?

    It only gets hot when you drive it down the road 1/4 mile? Doesn't get hot just sitting idling? Could be a head gasket leak under load. You might consider re-torqueing the head bolts to spec in the recommended sequence. You can buy a kit to test for combustion gases in the coolant at auto...
  7. E

    Leaking water temp probe on 850 ?

    Any auto parts store should have it.
  8. E

    Leaking water temp probe on 850 ?

    Gunny, I recall this problem with certain kits that defective. The problem with the kits was that they provided 1/2" ferrules, when 3/8" ferrules were required. This might be your problem as well.
  9. E

    Where is the Temperature Sending Unit located on a 4600 Ford

    Is it a false indication, or is the tractor really getting hot? Keep in mind that you may have a head gasket leak. Symptoms: Gets hot very quickly. Small bubbles in coolant when it gets hot. You can get a test kit for combustion gases in the coolant at auto parts stores. Costs about $40.
  10. E

    3000 PTO

    Howdy Morekick, Have you checked the free play in your clutch pedal? Push the pedal down by hand till you feel resistance. Movement should measure about 1-1/2". If it's more than that, adjust the clevis in the clutch linkage.
  11. E

    640 - as good as its gonna get

    Nice Job. Looks like an old Case tractor in the background of one of the photos?
  12. E

    Ford 700 Tricycle Front End Power Steering Control Valve

    Howdy espage, The following salvage yards list a ford 700 in salvage: Roberts Farm Equipment, Inc Phone: (800)367-8751 or (513)796-2154 ______________________________ Colfax Tractor Parts Phone: (800)284-3001 ______________________________ Mid-South Salvage, Inc. Phone...
  13. E

    Ford 5000 high crop parts

    Check the "dismantled machines" section at tractorhouse.com They have 105 ea. 5000's listed in salvage. Some with photos.
  14. E

    Ford 9600 Hydraulics Question

    Thanks Bern.
  15. E

    Ford 9600 Hydraulics Question

    Ford 9600 tractor. Is it possible to plumb a loader directly into the hyd pump leaving the remote outlets free to operate?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top