(800) 853-2651
SHOP NOW

Recent content by farmall460ih

Yesterday's Tractor Forums
  1. F

    560 farmall

    yeah you can get one at the auto parts store that has one wire to your coil, one to ground and one to battery.
  2. F

    301 misses need help!

    what size number drill did you use for drilling out the load jet? we are already drilled out to .065. thanks
  3. F

    301 misses need help!

    bought a 301 motor and put it in a 460. the motor already had the petronix electonic iginition on it and dennys 8 mm wires on it. The motor runs great until it hits about 2400 rpms then it sputters real bad. the governor weights have been ground to half their weight and a stiffer spring is...
  4. F

    460 farmall speeds

    this depends greatly on your tires and rpms though.... i run a 460 in the high side of 3 rd grear at 10 mph with 18.4 34s
  5. F

    MN Pulls

    osceola wi. sept 11 luck ffa pull sept 18
  6. F

    301 Stroke

    with a 4 in bore you would be at 414 cubes then. wow!
  7. F

    301 Stroke

    i would like to know how this whole thing turns out... i like the idea... if your going to do it why not go bigger than eveyone else.. i have heard of 5.5 stroke but never seen it
  8. F

    Biggest Cube A

    rumor has it there is one that has nearly 1000 cu in .... dont know if it is true or not
  9. F

    966 vs. 1066

    a 966 is a 1066 with no turbo.. so you would for sure want to pull the 1066 or bigger
  10. F

    6620 running over stalks

    we have a jd 6620 hydro combine with a 6 row 30" row corn head for it. The driving wheels run over 2 rows of corn.. anyone know of a hub spacer we could get to widen it out to miss them?
  11. F

    Farmall 560 Weight

    6000 lbs if you still have the cast rims and the hyraulics
  12. F

    Farmall 460 flywheel bolts?

    on a regular 460 the bolts are just torqued to 60 ft lbs... they are special bolts but they dont have clips
  13. F

    farmall 460 gets stuck in gear

    thanks every one... i adjusted the clutch linkage a little tighter and took the pins out of the ta linkage... i realized that is was stuck in the ta or the back position... i think i have it straightened out now thanks
  14. F

    farmall 460 gets stuck in gear

    just recently got a 460 gas put together with a 301, a big cam and some head work.. pulled it yesterday and got to the end of the track and spun out in 2nd gear. pushed in the clutch and tried to get it out of gear.. it was jammed.. the skid operator had to move the sled towards me to let...
  15. F

    Allis-Chalmers HD-!6D

    external_link
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top