(800) 853-2651
SHOP NOW

Recent content by FarmerHR

Yesterday's Tractor Forums
  1. F

    Should the Bottom Surface on a New Bush Hog Be Coated

    Am putting a new bush hog into service. Our old one developed holes in the pan from rust and wear. Would it be a good idea to coat the wear surface with something on our new bush hog ? I would appreciate any suggestions of what materials to use and how to apply the coating. Many thanks for any...
  2. F

    Thank you for your suggestions.

    Thank you for your suggestions.
    • FarmerHR
    • Profile post comment
  3. F

    Plannng to put a new bush hog in service. Wore some holes through outside of our old hog. The...

    Plannng to put a new bush hog in service. Wore some holes through outside of our old hog. The inside surface just seems to be painted. What would be the best material to coat the underside to prolong its life ? (ie type of coating) Many thanks for any help you can give me !
  4. F

    Safety Instructions For Paint Hardner Sold on This Side

    Thank you for your help. I have sent them an email per your suggestion.
  5. F

    Safety Instructions For Paint Hardner Sold on This Side

    We are going over our Massey Harris 444 including a new paint job. Am planning to purchase the old Massey Harris Red from this site along with some hardner. What are the safety precautions for the hardner sold by this site ? Is a forced air mask required ? Would appreciate hearing any...
  6. F

    Engine Paint for MF 444

    Thankyou very much for all the help you gave. Your suggestions were right on. Best Wishes !
  7. F

    Engine Paint for MF 444

    This spring we are going to go over our Massey Harris 444 gas tractor. A new paint job is part of the plan. Can any suggest where I can get the correct paint for the engine ? It currently is kind of a faded goldish color.. This is a working tractor and we would like have it look reasonable. It...
  8. F

    Engine model in my Massey Harris 444

    We have a Massey Harris 444 gas tractor. The serial number is 705xx. Where do I find the model number of the engine ? It is a four cylinder with a 4.000 inch bore made by Continental. I need to order some parts and I want to make sure I give the correct engine model. I believe it is the...
  9. F

    Massey Harris 444 Exhaust Valve Seat Inserts

    Thank you for your help. I appreciate your kindness. Only the exhaust valves have inserts. The intake valves do not appear to have inserts. Best Wishes !
  10. F

    Followup Case 841 Quick Disconnects Problems

    RJKeith, Straw Boss,Tgrasher, LPakiz, Case Collector SC, ruetred, nick831 Thank you for your help on 10-31-23. Spraying the relief ring with penetrating oil worked. Had moved the levers back and forth before I tried to hook up the hudralics. Also found that one of the holding straps on one of...
  11. F

    Massey Harris 444 Exhaust Valve Seat Inserts

    .We are going over the H277 Continental gas egine in our Massey Harris Row Crop 444 tractor.The serial number is 70xxx. I believe is was manufactured in 1956. We have pulled the head and have been going over it. Our repair manual states that the exhaust valves have inserts for the valve...
  12. F

    vALVE SEATS ON A mASSEY hARRIS 444

    We are going over our Massey Harris 444. It is a 1957 model. Has a H277 gas engine. The exhaust valves and valve seats are quite worn on cylinders number 1 & 4. The rest look fine. Has anyone had any exppreience in replacing the exhaust valve seats and exhaust valves ? The repair manual lists...
  13. F

    Female quick disconnet fittings on Case Series 830 model

    Thank you for your fine suggestions. Will give them a try and will let you know what happened. It will be a week or two before I will be back out where the tractor is. Best Wishes
  14. F

    Female quick disconnet fittings on Case Series 830 model

    RustRed Thank you. They are the original female couplers that came with the tracto I believe. So they would be whatever Case used then. Thank you for your help.
  15. F

    Female quick disconnet fittings on Case Series 830 model

    We have a Case Series 830 model 841 tractor . It is a 1967. We have owned it for over 25 years. It has been a great tractor for us. We very seldom use the remote hydralics. They were last used about five years ago. I was easily able to put the male fittins in then. I tried to use them...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top