Recent content by farmerjim72

  1. F

    Super mta engine id

    Few years ago got a super mta from a family friend. Pritty rough shapsheet metals good but t/a was out steering wobbled in 3 gear not even safe in 5. any way trying to get it to run well now compression is 50 55 75 60 was the same after adding oil in the cylinders. Figured cylinder head issue...
  2. F

    620 reduction gear cover shaft

    Finally got the crank back for my dads 620 and we are putting it back together wondering is there a torque spec for the nut on the shaft that comes threw the reduction gear cover. Wondering if some one can help or is it just snug it up and back it off that the cotterpin fits threw?
  3. F

    620 main bearing removal

    I would just like to thank every one with the post about the seal. The seals was sealed shut and when I pulled it out the oil came running out . Going out tomarrow to find somthing to Put in place in the hole. Pulling the other side apart tomarrow and lucky part was the crank looks great yet
  4. F

    620 main bearing removal

    Thank you I’m assuming the bearing is stuck on the crank. And when we had it running the oil pressure was on the high side was gonna look at the line to the bearing when we got it apart. The rockers had oil the connecting rods had oil so not sure why this one locked up but it looks dry
  5. F

    620 main bearing removal

    Got my dads 620 running the other day and quit after about 6 minutes of running it locked up tight come to find out it’s locked in the bearing behind the flywheel. We have it pulled apart to the point of the block and rods pistons are out and the fly wheel off just trying to see how you get...
  6. F

    Farmall mta help

    I have the tractor all apart and the ta installed I’m wondering when I installed the clutch if the ya can only be rotated one way or not grew up working on deers
  7. F

    Farmall mta help

    I’m installing a ta in a super mta and looking for some one to talk to have a couple questions regarding this any help would be appreciated thank you
  8. F

    Super m670 super steering

    Thank you
  9. F

    Super m670 super steering

    Sorry should look at what I sent first were did you get the valve and a part number for it
  10. F

    Super m670 super steering

    We?re Dudu get it and a part number
  11. F

    Exhaust Lift

    If you need some help I have some extra parts and a pile of new leather seals for the cylinder
  12. F

    Super m670 super steering

    Have a later super m670 not having the best luck with this tractor had a leaking steering shaft and find out some one converted it to a standard orbital valve. Well got the correct valve and installed it well now we started it up and it steers fine to the left but won?t steer to the right shut...
  13. F

    John Deere 60 hydrolics

    I will put some pictures up when I get home and sorry about the auto correct
  14. F

    340 utility steering shaft leaking

    I have a 340 utility the other day was using it and looked down and there was oil running down over around the shifter after looking into it there is a pipe plug with a hole in it up the steering shaft. When it was running and I would turn the steering wheel oil runs out the plug. Was...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top