Recent content by FergFord

  1. A

    BX2200 rear aux hydraulics

    Anyone add the rear aux hydraulic kit BX7326 to a BX2200.
  2. M

    Case David brown 990

    I just bought this 990 and the 3 point was working when I bought it but now it will not go down .what are all the levers and knobs for? I have heard about a lock on the left side but it is not locked thank
  3. F

    Dearborn loader

    Andy D. Yes. I did although I hate to admit it. I had the firing order reverse. I checked the order about 10 times and each time I had the wrong rotation of the distributor in my head. Argh!!!
  4. F

    Dearborn loader

    No not free. I paid $500 for it and am looking for a reasonable offer. I am about 1 hour north of Denver, CO.
  5. F

    Dearborn loader

    No not giving it away. I paid $500 for it and looking for someone to make a reasonable offer.
  6. F

    Dearborn loader

    Anyone looking for a loader? Dearborn 19-21 or 19-22 for 2N, 8M, 9N, NAA, Jubilee
  7. F

    Dearborn loader

    Anyone looking for a loader for their TO20 or TO30? I have a Dearborn 19-22 or 19-21 loader that is taking up space. It is a trip bucket. Needs new hoses and spool valve.
  8. F

    OT-Nail Gun Recommendation

    the bostitch are good nailer I have 2 or 3 of them. Good value for the $. BTW. If your stringers are also cedar I do not recommend using ringshanks. The cedar is too open grain for the ringshanks to hold for a long time. They will work themselves loose. They are better than regular shank but...
  9. F

    Backfiring TO-20

    Mark, I did not pull the distributor during the rebuild and she ran well after reassembly. so the timing was never messed with. I will recheck the carb to manifold bolts maybe something is a little loose. The new fuel line should make things better. The old fuel delivery was a mess of...
  10. F

    Backfiring TO-20

    doubled checked this but it is correct. di have it backwards once this spring after changing the plugs. runs like hell with reversed wires. Mark
  11. F

    Backfiring TO-20

    jerry, thanks for the reply. I have read your comment about spark many times. The spark is as expected. This does not appear to be a weak spark issue. I have not touched the timing since she was running last week. It would seem odd if the timing/points/distributor had a failure just by...
  12. F

    Backfiring TO-20

    More info. Prior to the fuel line work this week I had her running smoothly for about 30 minutes at low idle after finishing the rebuild and valve adjust.
  13. F

    Backfiring TO-20

    TO-20 is now backfiring and I can not determine why. History. Just finished a full engine and carb rebuild. Doing some tune-up work today after installing a new steel gasline. Valves were set correctly. Good fuel flow. Good spark. Choking helps a little as does a slight increase in tension on...
  14. F

    Rebuilding carb on TO20

    Just finished rebuilding my TSX-361A. Nothing too difficult. Be aware that some of the Tisco kits do not always have the correct parts. I purchases a C548V and it had the wrong main nozzle and was missing the throttle shaft seals. I reused the old main nozzle as it just needed cleaning. The...
  15. F

    TO 20 ?'s for adding loader

    Todd, I also have an extra pump and jackshaft if you need one. Mark
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top