Recent content by FireWater

  1. C

    How to get 12V power from 24V system?

    Tractor is a JD 4020 with the 24V system, and I need to get power to my planter marker control box. The easy answer is to run a + wire to the + terminal on one battery and a - wire to the - terminal on the same battery, but that pulls a load from the one battery, and I have read that those...
  2. F

    Correct wheel weight for Farmall H

    Ill take my place in line , We promise to give them a good home. Thanks, North Central Ohio
  3. F

    Farmi winch

    Hello, like earlier reply, we tie our Post hole digger to a barn beam at a handy height to unhook & rehook. Also Lucky you we are looking to buy a gently used Logging Winch. We’re a little North of Columbus Ohio. Where are you located? Thanks.
  4. F

    Winterizing a 15 gallon sprayer on ATV

    Thanks for all the replies, very fast replies I might add. Wife was in town for Chili supplies, she picked up some antifreeze. drain, refill, clear water thru hoses, drain, add antifreeze, run pump till it came out spray nozzles & spray wand. Thanks for all your help
  5. F

    Winterizing a 15 gallon sprayer on ATV

    Looking for ideas on how to winterize ATV mounted 15 gallon sprayer, used for herbicide. has 10' boom and hand wand. have considered rinsing with plain water followed by RV antifreeze. No I don't have owners manual. thanks for all responses.
  6. F

    Experience with steel tracks on skidloader?

    We have a Bobcat 773, diesel, hand/foot controls. Owned it for 3 years, March 2018 we bought a set of Prowler brand, Predator model steel OTT with rubber pads. Very good investment, we bought a used set, he upgraded to a Track machine. That's not in our budget, these have worked very well for...
  7. F

    Ford 3000 over heating, fixed and thank you

    Hello, our son and I bought a Ford 3000 diesel, not running, PO widow didn't have much info, past renters of Farm said it ran 3-4 years prior, after much research here got it running, except it pegged the temp gauge at pto speed/ 1900 rpm, returned to cool at idle. round up the usual suspects...
  8. F

    Rust on hydraulic cylinders

    Thanks, that's exactly what we were needing.
  9. F

    Rust on hydraulic cylinders

    What are my options to remove surface rust from Hydraulic cylinder shafts (chrome ?) they are for the aftermarket 3 point we want to put on. Thanks, Ed
  10. F

    running gear tongue, what make

    We're interested in the extendable tongue, just have to run out and measure our wagon gears, we're wanting to turn a hay wagon into a log forwarder, We're in North Central Ohio, Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top