(800) 853-2651
SHOP NOW

Recent content by Flatlanderfool

Yesterday's Tractor Forums
  1. F

    Twin TSX-33's (pic)

    thanks Gary, two more to go, from here looks like Royse did a great job
  2. F

    Rattling radius rods Batman!!

    your email wasn't open so tried this. interested in finding out about rates on reworking tsx 33 carbs my email is [email protected] JJ
  3. F

    carb on a 52 8n

    either one after a kit has been installed and full cleaning
  4. F

    PTO cover

    the grease zerts come out and then a pin is knocked out allowing the over run to come off, then the cap can be screwed into or onto the tractor, but the orc needs to be removed
  5. F

    napa gasket number

    Thanks guys anyway, the only reason I pick on Napa is it's close and I have WMD, believe me its the pits on trying to make or do detail work anymore. Got to count my fingers after using a knife on anything!!!
  6. F

    napa gasket number

    Went by Napa to pick up some gaskets for the transmission drain plug on a 2N front mount ford tractor, the ford part number is 8N7011 and fits both the tranny drain and pump drain plugs. My question is does anyone have a napa cross over number that I can tattoo on the counter guys forehead so he...
  7. F

    OT Credit Fraud

    Yep, same here, decided I didn"t need a non- functionable life lock so out they went. As to anybody better, who knows, the checking on line BofA account works pretty good, just alittle more hassle, but at least I"m aware of whats going on.
  8. F

    OT: Whats this weed?

    kinda looks like russian thisle, has it ever budded out on the top, kinda like pods, maybe two or three buds on a plant. Russian thisle will get two or three feet tall if you let it and have sticky leaves when half mature. Generally a broad leaf spray will kill it.
  9. F

    For J. Jackson...two TSX241B's....completed

    Looking good GB, Now I know I"ll be able to get 43 miles to the gallon:)
  10. F

    Suggested timing light for 6v 8N?

    YEP All five of them!!!!
  11. F

    rotor tiller for a 8N (1952) ford tractor

    Dell is 100% correct, the rototiller will push the tractor along without the tiller doing any tilling, I almost picked up a tiller and the owner of the dealership advised me of the same thing. I rented a kubota (with high and low range) and tilled with it in Low side 1st gear, worked great. When...
  12. F

    9n Carb

    yep, sounds as if you need a new carb. Either a used one bought off ebay ( TSX 33 or TSX 241 both marvel/schebler will work, rebuild it or have someone else rebuild it. Or buy a new reproduction zenith carb ($$$$$$) But just finding the upper half of the carb to fit a 2n8n9n is alittle hard to...
  13. F

    parts

    Just so happens that I"m working on about the same thing. After looking thru every tractor and equipment house in the nation for on the shelf, ordered one (may need two or more) from Shoupe parts. They take measurements and have them made up. Takes about three days and then add the length of...
  14. F

    Ford ? Model

    Ultradog Got a question, on your 201 flex hitch disc that you reworked and cut down, the scrapers that became extra parts, would you consider selling them or are they backups. Looking for (2) rights and (2)lefts, last resort is to fab them! Thanks for any info
  15. F

    tire dismounting?

    Old I"ve found that if I took a six foot or so pc of channel iron about 6 or 8 inches wide or 4x4 wood post, put the end right on the rubber up against the rim, drive a pickup tire up on the 4x4 and let the weight of the front end of a pickup slowly work the tire free of the rim. A little soapy...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top