Recent content by Goat Boy

  1. G

    AMT 600 wont start

    Ok. I have seen that the pump is spitting gas through to the carb. Need to empty the carb to check for water. Need to check the spark but the spark plug was just replaced.
  2. G

    AMT 600 wont start

    Ok. So the cleaner can be a problem. Got it
  3. G

    AMT 600

    I decided to reword this problem in another post. I know that might be a bit. Frustrating but I think this post will lead people a stray.
  4. G

    AMT 600 wont start

    Im not sure why. Ive been driving this thing around for a couple weeks. I got the fuel filter replaced, put gas cleaner into the tank, because I noticed it was starting to sputter when Id give it gas. Since then its been really hard to start or it wont start at all. It seems like I have to crank...
  5. G

    AMT 600

    Yeah, so if the engine isnt turning that means no exhaust would be coming out. A little exhaust does come out so Im mistaken with how I have explained this problem. I think the engine is turning by as soon as I stop cranking the key it stops. The motor doesnt keep going.
  6. G

    AMT 600

    Just bought an AMT 600. Ive been having problems getting it started. The starter motor works great but it seems like the fly wheel isnt catching bc the engine isnt turning. I pull the choke out and floor it and it just never turns. The fuel filter has been changed and it used to start up...
  7. G

    Whats this part? Diesel international 574

    It tested out good. Pushed the button in and that gave me continuity.
  8. G

    International 574 diesel starting issues

    I found the button. Tested out good
  9. G

    International 574 diesel starting issues

    Would the key need to be cranked for this to work?
  10. G

    Whats this part? Diesel international 574

    What does this part do? Its in between the key for the ignition switch and the selenoid post. How do I test it. The selenoid wire goes through it. Is it activated by the crank of the key?
  11. G

    International 574 diesel starting issues

    Im not sure what the party is that I showed you in the picture. But it doesnt have any continuity from one end to the next. Im not sure how to test the function of this part but Ill go ahead and bypass it. Then test.
  12. G

    International 574 diesel starting issues

    Actually I just checked the started by plugging it in directly to the battery then shorting the selenoid. The starter gray popped out and spun just fine.
  13. G

    International 574 diesel starting issues

    Yeah I think I burned the contacts at the selenium because it made a quick kind of loud crank but then stopped and there was some smoke at the selenoid and the positive terminal. How do I check the starter selenoid?
  14. G

    International 574 diesel starting issues

    I attached to block still no crank
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top