Recent content by gonoles6100

  1. G

    Sears LT/10 surging

    I have a 1976 Sears LT/10 with a 10hp Briggs and it has trouble surging. I was wondering, what are the factory settings for the adjustments on the carb, i.e. 1/2 turn out. I like the tractor quite a bit, but the surging drives me crazy. Im thinking im going to take it off for a rebuild, but I...
  2. G

    Touch O Matic decal

    My friend and I have been looking for a Touch O Matic decal for his 49 JD M for about 6 years now, and we havent been able to find squat. Anyone know where to get them?
  3. G

    Super A belly mower issues

    Ive got a Super A with a (i think) Woods L59 mower, and I cant for the life of me figure out how to get the tractor to pick it up more than an inch and still be able to set it down on the casters. No matter how Ive adjusted the bottom chains or the top chain, all I can get is about an inch of...
  4. G

    Super A charging system

    Were all Super A's 6v positive ground? I figure they were. It looks to have the original style generator and regulator, but the battery is hooked up neg ground. The starter turns and the lights work and the engine runs, but it does not charge the battery. With the tractor off, if i turn the...
  5. G

    Super Dexta throttle issue

    Seems it wont hotlink, so if you dont mind giving me a link to where the pic is, that would be great. Im guessing its probably at the circular thing by the air cleaner in the throttle linkage.
  6. G

    Super Dexta throttle issue

    I have a us import Super Dexta, and the throttle is fine up until about half throttle, then any more has what feels like spring tension on it, so it automatically returns to half. I disconnected the throttle linkage so it was just the throttle pushrod coming from the injector pump to where it...
  7. G

    Carb

    My other post was as bigguy6100 just above, figured Id register. I had bought the tractor and it had just been painted. I looked at the manifold and there was no overspray, so I figure they took it off. It made me wonder about an intake leak since i doubt theyd replace gaskets (home brew...
  8. G

    Radiator too close to axle

    Im betting the pads are gone. They painted the tractor right before I got it, and it wouldnt surprise me if they fell off when the rad was out.
  9. G

    Radiator too close to axle

    I recently got myself a 9n or 2n, jury is still out since im scraping paint off the serial number, and the front axle rubs on the lower radiator elbow. Has the axle shifted, or is the radiator just set too far back? Should the radiator be set up higher? The radiator cap is very close to the hood...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top