(800) 853-2651
SHOP NOW

Recent content by greenandred

Yesterday's Tractor Forums
  1. greenandred

    Pulling a 706 Diesel questions?

    Well we did the last pull of the year, kind of a more local pull but shimmed up still we 1 1/8 low and watching I can really see the advantage of a higher hook. He did good, getting his gears and T.A. Figured out. To keep height up he pulled with pretty full tires plus he had to drive 6 miles to...
  2. greenandred

    Pulling a 706 Diesel questions?

    Ya you are right. I built it well but out of ignorance at the time. Ya, tire pressure and changing if from 9000 to 9500# farm really did effect the height. It concerns me some at a full length draw bar, shortened not so much, 2 1/2 X 1 1/2 cold rolled steel takes a great deal of stress in a...
  3. greenandred

    Pulling a 706 Diesel questions?

    Ya it could be shortened 7” keeping it pretty much stock yet and nothing is floating (the rules here too) everything bolted plate surface to plate surface with 3/4” dia grade 8 bolts…. It’s just absolutely not adjustable that’s my problem. This drawbar he bought only for pulling and I suggested...
  4. greenandred

    Pulling a 706 Diesel questions?

    It sets 18+” now to the top of the 1” hooking plate
  5. greenandred

    Pulling a 706 Diesel questions?

    I like these designs, never saw any that fancy up to the farm tractor class. From what it looks like from the photos is you eliminate the draw bar. I like these designs way you have the fully threaded bolts to lock your hieght in. According to the last inspector we had ‘everything had to be...
  6. greenandred

    Pulling a 706 Diesel questions?

    I appreciate your suggestions. Drawbar appearing bent is just the camera angle but yes it is possible to move the hit hitch 7” max closer to the axel d/t the power take off shaft and hookers grown on the shaft getting in the way when dropping the hook though. It really is beefier apparently than...
  7. greenandred

    Bush Hog disc

    Our area, due to multi flower rose, has lost 50%+ of most pasture land as farms are rougher with smaller pastures so it leaves no center open but invades from both sides and we have hills, someone named Ocooch Mtns.. pastures are steep and many places not even sensible to use a tractor and brush...
  8. greenandred

    Bush Hog disc

    Ya was asking advice using a brush hog and a 706D. Needing to reclaim pasture land.
  9. greenandred

    Bush Hog disc

    Thanks
  10. greenandred

    Pulling a 706 Diesel questions?

    706D ADJUSTABLE PULLING HITCH IDEAS NEEDED! Being new to pulling and started out pulling WC Alliss’ I fabber the 706D hitch at 18” but appears it is 10 years newer than the Allis and needs pulled in either the 9000 or 9500 Farm Class with a 20” height set. I sure could use any pics, drawings...
  11. greenandred

    Bush Hog disc

    Auto correct didn’t like ‘rule of thumb’ sorry
  12. greenandred

    Bush Hog disc

    With a 706D what what would your f to Ike’s of thumb for brush diameter you could drive through With a 7-8 for pull behind older brush hog- Example: old growth sumac patches or trees in set aside fields. We are infested with multi flower rose (was given out free in Ag class when I was young by...
  13. greenandred

    Pulling a 706 Diesel questions?

    No problem with these boys they are solid country. Very fortunate!!! I appreciate all the help from all you guys.
  14. greenandred

    Pulling a 706 Diesel questions?

    Well that clears it up, 4 years to new🥹…😎. They finished the 720 Gas project a few days ago (hadn’t run for 20-30 years) but I don’t believe he’ll pull it this year or even if that is what he has planned. It sounds good, the old JD pop pop pop pop sound. We had a neighbor who farmed with a...
  15. greenandred

    Pulling a 706 Diesel questions?

    I should have said closer to 63 years old but not able to pull in the antique class! Really only 10 years difference between the 706D and my other Grandsons WD 45 which can always pull in antique. Why should the weigh class, not he age, define what is antique or not, I guess is what my question...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top