Recent content by hue1998

  1. H

    What did this front axle originally belong to?

    It sure is. I m currently trying to break it loose so that I can move it in a bit to get in between my loader jacks.
  2. H

    What did this front axle originally belong to?

    Perfect. Thanks for the help guys!
  3. H

    What did this front axle originally belong to?

    This front axle does not appear to be original to my JD2510. Every picture I've seen of a 2510 has had the retention bolts through the sides, not the top. Question is, out of curiosity more than anything, what axle did a previous owner replace mine with? [/img:637004518f]
  4. H

    John Deere 2510 running rich/rough, gas in crankcase

    My new-to-me John Deere 2510 tractor died on me and was acting starved for fuel. I found quite a bit of gas in crankcase and after some investigation I found a kinked fuel line between the tank and the fuel pump. I figured the diaphragm failed in the fuel pump (hence the gas in the crankcase)...
  5. H

    Idle problems

    Thanks. Appreciate the confirmation! After posting this I also took a good look at the linkage parts and found the pivot link between the throttle plate and governor linkage was binding against the retaining clip. A little time with the grinder, a little grease, and everything is moving...
  6. H

    Idle problems

    My new to me 2510 will not idle from running RPM unless I manually push the governor linkage toward the idle position to close the throttle plate. After reviewing the parts break out it appears I'm missing an additional arm and a spring for this assembly. Could this cause the issues I'm...
  7. H

    JD 2510 48 FEL Plumbing

    Buick, do you think the FEL will be plenty functional with the factory pump? Good to know I can swap it out with an 8-piston. Hay maker, that's perfect thank you. Do you have any pictures of your work? Jim, does that cover will fit a 2510 even though it's not listed under Deere's website...
  8. H

    JD 2510 48 FEL Plumbing

    Thanks Jim that makes sense. My trans is an SR
  9. H

    JD 2510 48 FEL Plumbing

    Hey guys. I just bought a 2510 and I'd like to plumb a 48 FEL for use on my acreage. I've been doing some reading here and the general consensus seems to be to tap into the elbow in front of the brakes and then tap into the filter cover or the rockshaft return line for the FEL return line. I...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top