(800) 853-2651
SHOP NOW

Recent content by HVFDfirefighter

Yesterday's Tractor Forums
  1. H

    Fire Dept.

    I've been on the local Volunteer Fire Department for 21 years. 17 of those years as an officer. New York State is trying to turn us in to professional firefighters. They want us to put the same hours in and take the same classes that payed firemen do. It is going to kill small Departments...
  2. H

    SUPER A Not Running Right

    So just to recap: my broken nozzle has 4 holes near the bottom of the tube and two holes closer to the threads (6 holes altogether) I can't seem to find the exact replacement. In my search for a replacement, I have seen some nozzles with just 4 holes on the end and some with 3 holes going up...
  3. H

    SUPER A Not Running Right

    I'll have to look. I did install a ballast resistor under the gas tank. I am thinking, maybe that is not quite right. It is ceramic with what looks like a cylinder type fuse on the back. Maybe that is broken. But if it were broken, I would think tractor would not run at all.
  4. H

    SUPER A Not Running Right

    thanks for the ideas guys, I'm gonna try to solder the threads. Probably end up buying the nozzle with just the four holes on the bottom. The tractor starts and runs great but after running a while will shut off. I can pull the starter rod and it starts right back up will run a little...
  5. H

    SUPER A Not Running Right

    Thank you. I will give that a try. The tractor runs great for about 10 minutes then starts shutting off. as soon as it shuts off I can restart but only runs 5-10 seconds. Maybe something in the gas line. I will double check that as well. I know this nozzle is broken, I am hoping that's whats...
  6. H

    Re: SUPER A Not Running Right

    You can see how the threads broke off
  7. H

    SUPER A Not Running Right

    this is what I have
  8. H

    SUPER A Not Running Right

    i tried to jb steel stick the threads back on. No luck. That's what the black material is in the photo. I thought about jb welding nozzle in place. Id really hate to have to do that.
  9. H

    SUPER A Not Running Right

    So I was able to get the threads out of the carb. Now I need to replace the main nozzle (#25) I searched for a few weeks now with no luck. I can find one with four holes near the end of the tube. Mine has four holes at end of tune and two closer to where the threads should be. Anyone have any...
  10. H

    SUPER A Not Running Right

    Guess it would help if I actually put the picture on.
  11. H

    Help with Super A Radiator

    I had taken the radiator off my 1952 Farmall Super A Serial number 336453. Got the radiator flushed out. Put all back together, no leaks! Started the tractor up after working on the carb. Let it run for a bit and I noticed antifreeze dripping on the floor. Shut it off, It is dripping out of...
  12. H

    SUPER A Not Running Right

    Well the good news is everything in the carb was correct. The problem was that the main jet (#25 pictured below) was plugged. I got it cleaned out. It was not an easy job to get it out, it came out hard. As you can see from the picture below, the problem now is that the threads are missing...
  13. H

    SUPER A Not Running Right

    Happy Thanksgiving everyone. I have the day off so my plan is to take carb off and have look. Yes, I am restoring the tractor. It's almost done. If I can get it running, put the hood on, decals, new muffler and rain cap...it should be complete (not that they are ever done) I've cleaned the air...
  14. H

    SUPER A Not Running Right

    I have cleaned the gas tank. So I know it has good gas. Replaced sediment bowl the old one was cracked. Absolutely no gunk floating in bowl. Brand new good gas. I took distributor off and cleaned all contacts. Have a great blue spark. Checked all plugs, have good spark too. I put gas in each...
  15. H

    SUPER A Not Running Right

    Should have mentioned, air cleaner is clean. New oil in bottom also
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top