-
I
Changed regulator now battery drains when parked
Sorry, it has been a long couple days. Apparently I'm thinking in electrical term reverse today. I'll give it a rap and see if that fixes it. It would be kind of annoying if I end up having to put a new regulator in again. I replaced it due to the charge light constantly coming on and the... -
I
Changed regulator now battery drains when parked
I have a 641 with a 6v system and my voltage regulator wouldn"t stay polarized so I picked up a new one. The tractor runs better than ever now, however once I park it the battery drains out completely. I checked the wires and they"re on there correctly as far as I can tell and everything runs... -
I
641 generator repair kit?
Unfortunately it doesn't say, the line from the catalog says exactly: LP-GRK401 Kit; 2 brush generators, LP-8N10001 and LP-FAC10002A. $10.22 There's a pretty picture with what looks to be the brushes the bearing and related parts but I guess I'll have to mail them. If the numbers are... -
I
641 generator repair kit?
I have a gas powered 6v 641 that keeps having the charge light come on. The generator has always been touchy on this tractor so I am guessing it"s time for a rebuild. I replaced the wiring harness and that didn"t fix it and am going to order the regulator along with the kit. Case-New... -
I
Replaced wiring harness now no start
That did it, thanks! One more question, now the neutral/clutch safety switch doesn't seem to work, I hit the starter with the clutch not engaged and it still turned over. I don't remember it doing that before, what did I wire wrong? -
I
Replaced wiring harness now no start
I have a 1958 Ford 641 with a 6v system. I decided to replace the original hacked up wiring harness with a new one I got from external_link. I replaced the wires one at a time making sure I did it correctly and went to start it. Something toward the battery clicked once and now the tractor won"t... -
I
NY ROPS Program
I agree completely. Unfortunately when you live in NY State and you're being taxed the absolute hilt, especially in Niagara County where property taxes are the highest or second highest in the nation, you might as well take advantage of programs like this. It's not like if you don't your taxes... -
I
NY ROPS Program
Hey thanks for the heads up. Hopefully my 641 is eligible. I was mowing some rolling ground a few days ago and it got really sketchy for a minute (front tires lifted quickly) -
I
Original color picture of Ford NAA or Jubilee needed
I've been wondering why I can't seem to find any pictures of original color tractors anywhere on the internet. It's like people didn't bother to take pictures of the Fords. -
I
Ford 641 not starting
Well, what fun awaited me in the barn this morning. Apparently the float was stuck open and the tank emptied on the ground. After I shut the barn door after the cow ran out and closed the shutoff I decided to double check the points setting. I removed the rotor and happened to look at the... -
I
Ford 641 not starting
Since it floods out of the intake and after I put in the new plugs there doesn't seem to be evidence of flooding (plugs still look pretty clean and dry) is there a chance something in the carb itself is seized up? If the float were stuck it would not get any fuel at all, correct? It is freshly... -
I
Ford 641 not starting
I just got back from Napa with my new plugs and wires. I have a strong blue spark from the coil. Firing order is correct, as far as I can tell. I doublechecked by feeling for compression in the #1 cylinder and ensured that the rotor was still pointing toward the #1 plug hole on the cap as it... -
I
Ford 641 not starting
I have a 641 with a TSX 765 carb that was just rebuilt. I replaced the points, cap, rotor and condenser and I am getting good spark. I took off the tube to the air cleaner so I know I'm getting air and there is fuel. The tractor doesn't even want to try to start but it does tend to flood so... -
I
Appropriate size plow for a Ford 641?
Fortunately the tractor has relatively new ag tires and full pie wheel weights. Not sure if they're filled or not. Hopefully it will be sufficient, I believe the pie weights are 600 a side.- Inwo
- Post #1
- Forum: Implement Alley
-
I
Appropriate size plow for a Ford 641?
I was looking at them actually. Thanks for the warning, their free shipping was starting to burn a hole in my pocketbook. I also was looking at the Aldo Biagioli rollover plow that can be bought from their US distributor. http://vinfe25.vinf.it/aldobiagioli/catalogo/immagini/upload/305.pdf...- Inwo
- Post #1
- Forum: Implement Alley
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy