(800) 853-2651
SHOP NOW

Recent content by Irv Boersen

Yesterday's Tractor Forums
  1. I

    Sling Chain

    Is 5/16 G80 Chain Sling Double OK for securing a tractor to a trailer for transporting?
  2. I

    Rock shaft lift arms

    John Deere 620 - Trying to remove lift arms. Removed the bolt, but can not get the arms to move. Am I missing something? Want to remove to get on the tractor from the back/rear.
  3. I

    John Deere 530 plugs

    What number Autolite plugs do you recommend? I use the tractor only for tractor rides, no field work.
  4. I

    John Deere 530 plugs

    What plug gaps are used for a John Deere 530? I'm using AC Delco 87
  5. I

    Case SC Cylinder Head

    Western Michigan, between Holland and Grand Haven, Michigan
  6. I

    Case SC Cylinder Head

    Looking for 1944 Case SC cylinder head part # 5617 or 5618. Let me know what you have.
  7. I

    Shims needed for 1944 Case SC

    4.060 inner 4.235 outer shim width .175 Need 2 shims .002 need 2 shims .004
  8. I

    Tire size

    Men, I have 12x38 tires on MH 30. Need to replace. Which size works that is equal in height and width? Thanks for all your help. Irv
  9. I

    Huber serial # list

    Does anyone have a serial number listing for the Huber tractor? Irv
  10. I

    frame on a MH 30

    Men, Can I put a bolt with a hook through the bottom of the frame belly to chain/tie down a MH 30? Put one on each side for transportation on a trailer? Or will it crack open the frame while in transport. Irv
  11. I

    Powering steering

    Men, John Deere "50" with power steering. Turns very easy, one finger. Right now when it is turned all the way to the left and I want to turn it back to the right, I can turn the steering wheel a full complete turn before the wheels on the ground begin to move. This will happen also when the...
  12. I

    frost on the exhaust manifold

    I just got a Massey Harris 44 gas tractor and when I start it frost forms on the exhaust manifold for about 4 inches - up - from where it mounts to the carb. Is something wrong or is this normal? I'm from West Michigan and the outside temp is around 30-40 degrees.
  13. I

    remove oil in hydraulic lines

    I have a Massey Harris 44 and I want to change the hydraulic oil in the reservoir and the lines. How can I get the oil out of the lines? Reservoir is in the front of tractor and the quick couplers are in the rear. Thanks for any help. Irv
  14. I

    belt pulley and nut

    Looking for a belt pulley and the nut to hold the belt pulley on the shaft for a Massey Harris 44. Is the nut a special size and thread? Thanks for any help. Irv
  15. I

    Pulling tires

    Pulling guys, I just purchased a 1951 Massey Harris 44. It has Firestone 12-38 tires on the rear, closed lug tread. Are the closed lug tread any good for pulling? And, what would be today's equivalent. Thanks for your help. Irv
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top