Recent content by jacob morris

  1. J

    590 (1979 2wd)

    hi, i stripped it down and found that one of the the balance weight bearings had collapsed, my problem is the 3 grub screws which hold the balance gear to the weight have sheared- elongating the holes in the process, i have searched bepco etc but no-one seems to stock the weights in the uk, what...
  2. J

    590 (1979 2wd)

    hi, i stripped it down and found that one of the the balance weight bearings had collapsed, my problem is the 3 grub screws which hold the balance gear to the weight have sheared- elongating the holes in the process, i have searched bepco etc but no-one seems to stock the weights in the uk, what...
  3. J

    good tractor with loader under 10k

    hi guys can anyone reccomend a good "modernish" "bulletproof" tractor with loader for under 10 k around 80 hp pref 4wd thanks
  4. J

    590 (1979 2wd)

    thanks for the reply, unfortunately its made my head spin! i have ordered a book and on friday i will take the sump off and have a look. From that point onwards i will probably be relying on yourself and DavidP,South Wales to help me out! thanks again, jake
  5. J

    590 (1979 2wd)

    hi, basically a noise started coming from the front of the tractor just under the power steering pump, we drained the oil and refilled it and the noise went away until we switched the hyd. from loader to 3 point linkage the noise then came back, now it is constant, hope this clears things up...
  6. J

    590 (1979 2wd)

    thanks again for your prompt and detailed reply!i am working away til thurs but hope to get stuck in on friday, i just hope the problem is easily identifiable,thanks again and i will keep you posted jake
  7. J

    590 (1979 2wd)

    thanks for quick reply,i will have a look asap, is this the kind of job i could do with the aid of a manual or am i better off taking it to a dealer, is the timing an easy task? thanks jake
  8. J

    590 (1979 2wd)

    hi guys, my 590 has a very nasty crunching noise coming from inside around the crank pulley area, it only does it if hydraulics are pumping, any ideas- it sounds expensive thanks in advance jake
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top