Recent content by JBarbee77

  1. J

    Leaking fuel tank on 1948 John Deere A!

    All you have todo is chase the fumes out with water. Duh!
  2. J

    Pole shed wiring

    If you want to run 20amp, 110v, you need 12/2 romex. In pipe.
  3. J

    '68 4020 PTOproblem

    Thanks guys for the input. I just have one more question. Where is the first picture located in the tractor? I see the cluch petal, is it under the platfrom or on the side? I can"t tell by the pic. As always thanks for the input. JasonJason
  4. J

    '68 4020 PTOproblem

    Have a 4020 power shift. The PTO dosen't fully disengage. When I have the lever in the off position, the PTO is still spinning. Is there an adjustment for that, or is something worn out? Thanks Jason
  5. J

    4020 Bursting Power Steering hoses

    Thanks WTW, I will make the repair ASAP. I have found ALOT of good info on this forum. Thanks again.
  6. J

    4020 Bursting Power Steering hoses

    DO NOT get the kit that John Deere says will fix it. Dontt waste your money. It has two metal fittings and a rubber line, and two clamps. I put that kit on one of my tractors, and the motor didnt start till the that rubber line was busted.
  7. J

    4020 Bursting Power Steering hoses

    Is it that little steel line behind the panel at your feet? If it is, I have the same problem. When one pops we just make a new line. It will last about six mouths and pop another. If you find out let me know. Jason
  8. J

    Remote cylinder problem

    Seems to Me like your on the right track. (I know you havn't been back to the shop.) You have to look at the piston and see if there is any damage. If there is you know that is it. Seems to reason, that it would leave some kind of mark. Good luck Jason
  9. J

    John Deere 70 shifter knob

    I think that knurled part screws off, and has 3/8" treads under it.
  10. J

    TE20

    I have a "52 model TO20, that has run great for MANY years. We (my dad and I) have rebuilt the motor five times. (that I know of). The last time, there was a crack between #1 and #2. I would say to pull the motor apart and having that crack fixed. Any good machine shop can fix it. That...
  11. J

    John Deere 401-c. Fuel problem

    Thanks LJD So I need to get the injection pump looked at? Maybe rebuilt?
  12. J

    John Deere 401-c. Fuel problem

    I have a 401-c that will run for about a minute and start missing and then shut off. I've changed fuel filter, no help. I've gotten ALL trash out of tank. Still no luck. I have taken fuel line loose from injection pump, and can hold finger over line, turn motor over and fuel DOSENT push...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top