Recent content by jcarbs

  1. J

    U302 anti sway for 3 point

    I was missing the hinge. Made one out of two pipes and angle iron. Made the stabilizer bars out of flat stock. tractor is a 1957 335.
  2. J

    NY fellas

    Aurelius. West of Auburn.
  3. J

    1957 MM335 Ser# 10401181 Tacho Flexible Drive

    Ken-in-Ky Well over a year ago I used a Belkamp speedometer cables from NAPA for both the speedo and tacho. 50" #6151603 tacho measured approx. 48" 63" #6151604 75" #6151605 speedo measured approx. 72" John
  4. J

    445 speedometer cable wanted

    I replaced both cables (tach and speedo) with generic cables from NAPA for my 335
  5. J

    335 hydraulic problem

    Captainhookerus excellent idea. I wish I saw your reply earlier. Thank you for replying. I ended up making an another clip for the valve side with a spacer to hold the tube in the hole at least a 1/2" deep. It seems to be working so far. John
  6. J

    335 hydraulic problem

    There is a metal tube (#11A8532) from the 3 point lift cylinder to the valve body. The end of the tube at the cylinder is held by a clip (#10A7709), what holds the tube to the valve body? I was lifting an implement yesterday and the tube popped out on the valve body end. What do I need...
  7. J

    Ford's Finest....

    Sparkplug wire routing. I once had the exact same issue on a 88 302 F-150. TSB: 94410 FEB 94 Spark Plug Wire - Miss/Buck/Spark Knock Also see this post http://www.ford-trucks.com/forums/279050-92-f-150-302-efi-e4od-tranny.html John
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top