Recent content by jeff ellermeyer

  1. J

    Ford 4500 backhoe

    thanks for the steering pump shaft tip. We took off the steering pump and the seal is kind of crisp so it will get replaced. However it is hard to believe that so much hydraulic fluid could pass by that shaft. So now we have taken off the auxillary? hydraulic piston pump (slipper pump??) that...
  2. J

    Ford 4500 backhoe

    Thanks for the replies. This has a stand alone main hydraulic pump shaft driven of course. When I filled the hydraulic resovoir and started the motor the steering did turn automatically as if the steering pump was priming up. Hopefully it is the seal on this pump huh?
  3. J

    Ford 4500 backhoe

    I filled the hydraulic fluid resovoir and it is overflowing the crankcase oil dipstick. How can this be?? Is there a connection between the two systems? HELP????
  4. J

    4500 Ford Backhoe parts 1972 model

    Looking for two levers for my backhoe(boom and curl) I think. Any parts machines out there? Merry Christmas everyone! Jeff
  5. J

    Ford 4500 backhoe

    All good suggestions. Maybe fabricating levers is the (easiest) way to go. I do like the joystick idea but am a bit lost on how to go about that.
  6. J

    Ford 4500 backhoe

    Hi I recently broke the two left operating levers on my backhoe. They seem to be pot metal and I think I need replacements. Any ideas out there??? thanks JEff
  7. J

    '72 Ford 4500 charging problem/electrical

    Well the belt is definitely working. I do suspect that the cable is wonky on the tach though. I need a primer on the gen system.
  8. J

    1972 Ford 4500 charging problem!

    Thanks for that. Should the generator be putting out voltage regardless of other problems down the line or is it "told" when to put out voltage by the regulator. I am trying to determine if the gen is bad and I guess understand how it works.
  9. J

    '72 Ford 4500 charging problem/electrical

    My red light came on and stayed.Minutes later the tach started acting jumpy(maybe not related but it comes off back of generator). My meter shows no power coming off each of the two gen wires. Is this normal or does the power come through the regulator first and tell the gen to charge? Could...
  10. J

    1972 Ford 4500 charging problem!

    I noticed the red light then the tachometer went crazy(maybe not related but the tach comes off the generator). With my meter there is no power coming off the generator's two wires. Is this normal? Could it be a regulator problem? I guess I really don't understand how the charging system works...
  11. J

    ford 4500 backhoe shifting problem

    That was exactly right. The bracket had fallen down and the spacers were at the bottom. I put it together and it works perfect. Thanks for your reply.
  12. J

    ford 4500 backhoe shifting problem

    My ford 4500backhoe (1972) has a shifting problem. The shifter is a four speed H pattern. I opened the top cover and the shift lever moves a slotted bracket that is pinned in with two bolts on the side of the case. The shift lever keeps coming out of the slot and I can't figure out how it makes...
  13. J

    Ford 4500 backhoe

    Thanks Jim.. I noticed that the leak was around the O ring where the flange connects to the pump. I will replace it today and hopefully fix the leak. What may I ask is the function of the push pull valve up at the loader controls? Is there a filter inside the hydraulic pump itself that must...
  14. J

    Ford 4500 backhoe

    I am looking for someone that I can ask a few questions about my (new) 1972 4500 backhoe. Also looking for a service manual for same tractor. I am experiencing hydraulic problems. Aluminum output tube leaks at flange on pump. Will try to remove tomorrow to see why. Can this aluminum tube be...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top