Recent content by jerry hamilton

  1. J

    Wiring problem with IH 584

    Thanks for the schematic on the starter. Yes, I did have this in the manual but apparently no one has a diagram showing the color of the wires and to which contact they go. I finally took it to the IH Dealer on Rt 172 at Guileford Lake. While they were trying to start it the battery melted...
  2. J

    Wiring problem with IH 584

    Thanks for the advice on starting my 584 IH. On monday I will have a person come over to the farm and we will try to start the tractor again. I this does not work lacking an accurate color code and contact guide for the ignition switch I will have it towed to the dealer at Guilford Lake. I will...
  3. J

    Wiring problem with IH 584

    :roll: About a week ago I tried to start my trusty 584 IH and absolutely nothing happened. It was dead. I figured Battery. I put a fluke on it and crossed 13 volts dc. Next I looked at the starter motor. All the wiring ends were roasted. I figured bad starter. It was only 3 weeks installed. I...
  4. J

    584 IH lost hydraulics

    RAS- the good news is I tried your method first. Because it seemed easier. I removed the valve under the mcv and put a pan under it. 3 seconds after the tractor started the pan was full of oil.I repeated with a larger pan. I gained steering,pto,3pt.frontloader. Everything is now okey. Thank you...
  5. J

    584 IH lost hydraulics

    Thanks, I will be on this tomorrow if it stops raining and snowing.I have had it outside for 3 weeks now trying to get everything right. I do appreciate the help. The repair people around here are just waiting for me to give up. But I don't care if I am on this til spring because I will...
  6. J

    584 IH lost hydraulics

    thanks, I thought about removing it but did not know what to do with it removed. I will try this and let you know.jh
  7. J

    584 IH lost hydraulics

    JimB I forgot to mention that I had 45lbs of air on the filler port for oil and had the dipstict removed and blocked that hole tool.jh
  8. J

    584 IH lost hydraulics

    JimB- I opened the hyd.line leading from the mcv to the steering control. The line bled foamy oil and gave off spurts of air-oil when I turned the steering wheel. The port that the line was connedted to on the bottom of the front of the mcv did not show any signs of oil coming out. I ran the rpm...
  9. J

    IH 584 lost hydraulics

    Thanks for the oring tips. I worked with orings but all I have are thicker than those in the mcv and I don't want to use the wrone part.
  10. J

    IH 584 lost hydraulics

    Thanks, I will proceed tomorrow. The filter is correctly installed and is the right one. I have prints for the hydraulics so I can locate the pipe for the steering supply. When the steering tightened up I thought we had suceeded and then the front tires started to move. But then we lost it...
  11. J

    IH 584 lost hydraulics

    JimB I put 45lbs.air on the filler hole,stopped up the gage hole on the transmission. Turned on the engine and turned the steering wheel at 1400 rpm.After about 10 minutes the steering tightened up and the wheels turned. Then the steering got loose again and I repeated the process until the...
  12. J

    IH 584 lost hydraulics

    JimB thanks for the information. I will try your suggestion tomorrow and let you know the results. We always love our tractors more when they are not running.
  13. J

    IH 584 lost hydraulics

    while cutting hay my IH584 (1978)sheared the woodruff key on the hyd.pump on the multiple control valve. I replaced the key,primed the pump,cleaned the oil basin,cleaned the intake screen,replaced the hyd. oil (6 gal.),turned on the engine and nothing happened. I have no lift,no 3pt.,no pto,no...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top