Recent content by jim7

  1. J

    F gleaner Hydraulics

    I have had gleaners for several years and i do have a manual for the f gleaner. when i tried to make the adjustments with the set screw on the header hydraulic control valve nothing changes. the header still drops like its in free fall. could air in the system cause this? thank you for your help.
  2. J

    F gleaner Hydraulics

    All the hydraulics work on my f gleaner except the header drops real fast when i lower it. i tried ajusting the header contol valve adjusting cap screw,but it changes nothing. does any one have any idea what the problem could be? thank you for your help
  3. J

    Tires - weather cracks

    I have run weather cracked tires for several years and have never had a problem,I will repace them when they blow out or will no longer hold air.
  4. J

    salvage yards

    cooks salvage clinton mo
  5. J

    3020 jd hydr

    where is the hydr screen located on a jd 3020. it is a syncro trans. thank you. jim7
  6. J

    Biodiesel in JD 855

    i will not use b5 or b20 in my tractors, when i used the fuel it clogged up the filters and left a mess in side the fuel tanks. maybe you can get by using it if you run it totally out of the tank before you park it. i let my tractors set all winter with the bio fuel in them and in the spring it...
  7. J

    Update on the A with antifreeze in oil

    i recently rebuilt my 1086 using all the great advice from this web site, i had never re-built a engine before, it runs great. it sounds like your sleeves are bad and you need to to put a re-build kit in.
  8. J

    3020 hydraulic problem

    buickondeere; the hyd fluid is returned to the filter case and i need to check where the supply is coming from. thanks for your help and thanks to all of you for you suggestions.
  9. J

    3020 hydraulic problem

    it is a early 3020,power shift and the hyd control was added by the john deere dealer when i purchased the loader from them. the loader worked fine for two years. thanks for all your help.
  10. J

    3020 hydraulic problem

    my 3020 jd hydraulic does not work real well until the tractor warms up, and then it works just fine. when i use the loader when i first run the engine it jerks and makes a noise but then after ashort period of time it works great. i have changed hyd filter and changed the hyd fluid,but i still...
  11. J

    Question on sleeve "O" rings

    i recently used petroleum jelly to install my sleeves on a 1086.
  12. J

    ih m spark plugs

    what are the best spark plugs for a m farmall?
  13. J

    Moisture in 2010 crankcase.

    after all those years the oil will turn white, change the oil again and you should be fine.
  14. J

    Farmall 100, engine questions, possible coolant in oil

    i recently had the same problem with a 1086, i took the oil pan off and you can look up at the sleeves and see where the leak is. jim7
  15. J

    1086 injectors

    owen aaland and pete23, thank you for the advice. i was able to get the injector out.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top