Recent content by Joe-AL

  1. IH Farmall 130 Hi-Clear High Clearance Row Crop Tractor
    Expired

    For sale IH Farmall 130 Hi-Clear High Clearance Row Crop Tractor

    International Harvester McCormick Farmall 130 Hi-Clear project tractor for restoration. Not currently Running, I have no interest in getting to run, too many projects and not enough time. Engine will turn over with a hand crank. Was last running 4.5 years ago. Head was rebuilt by an automotive...
    $3,500.00
  2. J

    A. 130, 140 Side mount sickle mowers question

    The late model highway mowers was the AI-23 for Super A, Super Ai, 100, 130, 140 tractors. They made 23 series mowers for other IH tractors as well.
  3. J

    Cub sickle

    The Balanced head sickle mower that was used on a Cub Lo-Boy was the International 105. There may have been other models also. The Cub-22 and L-22 are pitman driven mowers.
  4. J

    need help identifying this planter

    That looks to be an old International Harvester or P&O planter. That round seed hopper style was used into the late 40's and then became a POA or POAX reverse feed hopper with an offset in the hopper, that was used in to the 50's or 60's. The bottom parts are the same, as well as the plates...
  5. J

    Looking for IH #16 Hay Rake Parts

    The IH McCormick #16 rake that I used to have had A2060 double pitch roller chain.
  6. J

    farmall m vs. international 404

    The original paper 404 parts manual shows a live PTO setup but it is crossed out with "Not Available".
  7. J

    Farmall 140 value

    RTR, Why are you talking about your own tractors in the third person?
  8. J

    mower on super A

    The model is AI-23 and is part of the 23 series of mowers. I searched for a pulley for 2 years before buying another complete mower for one. The pulley is NLA from CaseIH. The manual is available from binder books.
  9. J

    New Holland 1010 Stackliner

    I own and use a 1010 also. I am not an expert on these by any means, but have had to work on mine a few times. Have you checked your fluid level and spin-on filter? The fluid level needs to be 10" in the reservoir. The 2nd table needs to be up when lifting the load table. It does require more...
  10. J

    IH 1100 and 1300 sickle mowers

    I am currently using an early model 1300 I reworked and I am very pleased with it. I was able to mow 2nd cutting hay at 6-7mph. The inner shoe, bar, and wobble box parts are fairly expensive. The parts lookup is available for both models on the IH website. You could compare parts numbers of the...
  11. J

    A-21 Sickle Bar Mower

    I bought mine from the original owner and is in very good original condition.It was purchased in the late 40's and is solid red with a creme colored pitman. Wisconsin Historical Society might have the colors in their database. Here is a picture:
  12. J

    Trying to Identify Sprayer

    It looks a lot like a "John Blue" Hi-Boy sprayer, made in Huntsville, AL around the 60's. I bought a Wisconsin THD off of one a few months back. They do well on flat ground, but will roll over on hills.
  13. J

    Sickle Bar Mower Question

    You have an A-21. I have two of them, one still has the original lettering, both have 6' bars. It shares a lot of common components with the C-21, and the later versions used on the Super C, 200,230 and 240. The A-16 would manual hand lift control on it. It is required to offset your left rear...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top