Recent content by JoefromAlabama

  1. J

    cross motor

    Love them cross motor series. Rebuilt the engine in the 10-18 a few years back, it is a original survivor. I am still working on the 12-20. It is rough condition but is almost all there.
  2. J

    CASE C

    Got it. Thanks for the help.
  3. J

    CASE C

    I bought a Case tractor a few years ago that I believe is a CASE C. The serial number tag is missing. Is there any way to determine what year model it is? Thanks for any help.
  4. J

    12-20 serial number

    Thanks for the information guys.
  5. J

    12-20 serial number

    A while back I purchased a case crossmotor tractor. The serial number is very clear and it says it is a 12-20 serial number A321140. In searching web sites that serial number shows to be a 1928 but it looks as if the last one was built in 1924. Can anyone tell me what year model it is? Thanks...
  6. J

    Rare Cases

    Would love to have you. The show was cancelled this year because of nnalert virus but other than that it is always the third Saturday in April. Weather plays a big part of how many attend but normally we have between 80 and 120 tractors and 700 to 1000 people. Since you are from Talladega do...
  7. J

    Rare Cases

    I am from Snead, al. My brother and I own the CaseIH dealership.
  8. J

    Rare Cases

    I have two of the 301 diesels. I think they are fairly rare. There were only about 900 built. My dad was a Case back then and sold two of the 301 diesels new. The engines were so bad both of those were in the junkyard within ten years. I wonder how many are still running.
  9. J

    530 -188 Diesel, what should the engine temp be

    180 degrees to 190 is probably average but there are several factors that could change that. If you are staying under 200 degrees while working it you should be good. As for the water loss the 530 does not have a recovery tank. When you fill the radiator to the top as the water heats up it...
  10. J

    Case 630 Serial Tag Question

    I AM NOT FAMILIAR WITH THE "L" ON THE SERIAL NUMBER PLATE BUT THE ONES WITH "H" DID INDICATE HIGH SPEED. FIRST, SECOND AND THIRD GEAR WAS NORMAL, ONLY THE FOURTH WAS HIGH SPEED. IF YOU WERE PULLING A HEAVY LOAD SOMETIMES YOU HAD TO BE GOING DOWN HILL TO GET IT TO PULL BECAUSE THERE WAS A HUGE...
  11. J

    Case tractor, First model with factory 3 point

    I have a 1958 200B that my dad sold new to our neighbor. I am the second owner. It came from the factory with the swinging three point hitch.
  12. J

    VAO FENDERS

    Don, if I can not find someone reproducing them I may try to work out something to use yours as a pattern. Do you have both sides or just one.
  13. J

    VAO FENDERS

    I am restoring a CASE VAO tractor. I have the rear round fenders but i do not have the shields that attach to the fenders and go forward. Does anyone know of anyone who is reproducing them? Thanks for the help.
  14. J

    Are the gas tanks in a 300b and 400b the same?

    a few years ago I bought a 300B gas tank to go on my 400B. It would not even get close to fitting. My best recall is the 400B tank has an extra cut out area for the com valve.
  15. J

    75 CASE MANURE SPREADER

    DON, YOU SHOULD HAVE THE INFO. I SENT IT SEVERAL MONTHS AGO BUT JUST IN CASE YOU DID NOT GET IT HIS DEALERSHIP WAS C&H TRACTOR CO IN SNEAD AL. HE STARTED IT ABOUT 1957 AND CLOSED IN 1968. MY BROTHER AND I BECAME CASE DEALERS IN 1988 AND ARE STILL OPEN TODAY. OUR DEALERSHIP IS SNEAD...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top