Recent content by Joein MS

  1. J

    Starter Check

    I got it going, changed solenoid again. Wore out must have nailed it. Thanks This post was edited by Joein MS on 04/04/2022 at 10:23 am.
  2. J

    Starter Check

    I will check that out if possible, I checked the solenoid studs, no continuity, only continuity is push button stud and battery side solenoid. Should my starter show continuity from starter stud to ground This post was edited by Joein MS on 04/03/2022 at 10:26 am.
  3. J

    Starter Check

    My 8n wouldn't start, The solenoid would just click. I cleaned all connection, battery is hot I replaced solenoid, Tractor fired right up I went back next day, same thing just a light click, like a bad connection. I messed with positive cable tractor fired off. I purchased another...
  4. J

    OT -- Kenmore top loader washing machine

    Tom try servall in the MS area, they have stores in Jackson, Hattiesburg, Gulfport, Tupelo and other locations I have the number for Hattiesburg & Jackson store, they can give You the rest, if needed, Just give them the model to look up 1-800-844-4690-Hatt. 1-800-844-4690-Jack
  5. J

    OT hot water heater problems!!!

    A tank that old, its time for a new pop off anyway as others have said , turn off your breaker, those are wet elements, they wont last long without water. If your pressure valve is on top , you probably can get by without draining any water, be safe not to get scalded If it is on the side...
  6. J

    OT Dish TV problem

    Tom go into the menu, and see what your signal strength is. If the dish is off peak,certain transponders will have less signal, and not lock on certain channels Also, is it a dish 300 or 500 or you may have the works and it will be 1000 The signal strength is under point dish The LNB or...
  7. J

    Crud! November Cow! Need a name!

    How about Ole Blue Eyes!
  8. J

    OT....Wife is in hospital

    Will be praying for Her, Gary and You as well philliapians 4:6,7 (KJ)
  9. J

    solenoid

    JustJim, I ran into this problem here while back, I didn't want to pull the starter check mate surface (time wise), I was needing to use My N I backed out one of my starter bolts, used a #8 or 10 wire ran it from the starter bolt to ground on my battery tightened starter bolt and...
  10. J

    IT.....IS.......ALIVE ! ! ! ! [don't want to sell it now]

    It sure is a good feeling, to hear it fire off, when You been working on one a long time
  11. J

    A Christmas Celebration

    Here is my Favorite so for this year very Good I think Merry Christmas http://www.youtube.com/watch?v=SzXJ3vuCzCc
  12. J

    OT Shop is Finished

    Good looking shop, glad for You
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top