Recent content by John Kruer

  1. J

    MF 175 decals?

    Might try "MapleHunters" I used them on my '64 135 diesel
  2. J

    135 lost pto power on engine but not ground speed

    Pull the lift cover off and take a quick look. The sleeve that connects the engine driven pto/pump may have sheared the cotter pin and slid forward thus disconnecting the pump and pto output shaft. This is the best case scenario of a problem. I would start there. The sleeve has a cotter...
  3. J

    Pulling stumps now won't start

    Ebay has a repair kit that has brushes, springs, bushings and brush holders for $20.
  4. J

    Pulling stumps now won't start

    Picked up brushes at NAPA. Part # R504 $3.65 +tax for 4 brushes.
  5. J

    Pulling stumps now won't start

    I was having the exact same thing happen to me today but not pulling stumps. I pulled the starter and took apart. The brushes were shot. Going to get new brushes in the A.M.
  6. J

    rear brackets for Dearborn snow plow

    Here is a link to the thread I started. http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ferg&th=85598
  7. J

    Wood splitter connection

    Here is the splitter I assembled. MF 135 diesel running at idle. Very efficient. [/img]
  8. J

    OT: Boat Trip

    I made the trip both ways on a 34' sailboat. The only thing that was difficult was the trip back up the Lower Black warrior with the river running. Not much fun but I hugged the banks to stay out of the strong current. I kept in touch with the tow operators on the VHF just to let them know...
  9. J

    what's this?

    Looks very similar to the one I had for a farmall cub with a fast hitch hookup.
  10. J

    Crispy Jubilee gas tank (pics)

    I would say that the spot welds rusted trough that are for the baffles. Must have been an old reused tank.
  11. J

    how do I get this off?

    Glad to see you were able to get it back to working order.
  12. J

    Red Fergy

    That's looks the same as mine. I had to go out and make sure my 30 hadn't slipped away from the barn. :D
  13. J

    MF 135, gas power, Perkins engine fuel tank removal

    Remove the two rear bolts that hold the hood support arm and then slide the tank rearward and that will unlatch the forward mount. The tank has slotted mount underside and it slides under the bolt heads. The springs keep downward pull on the tank.
  14. J

    MF 135 3 cyl Perkins Diesel rear oil leak.

    I have a 1964 135 w/Perkins dieasel. I am in the process of restoring and initially had an oil leak from the rear of the engine dripping through the cotter pin. I split the tractor and replaced the rear main crank seal. Upon running the engine for a while the oil through the hole has...
  15. J

    changing password

    Is there a way to change a password for this site? I need to change to a password easier to remember than the automatic one generated when requesting a new password. Thanks
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top