Recent content by Johndeerebones

  1. J

    4020 lift stopped working

    The chatter is inherent, alot of tractors do that. Does it have the covers on the sides of the lift or not? The first order of business is to make sure the cable is working. He did say the pto still works, but what kind of pto is it? Is the tractor a syncro-range or a powershift?
  2. J

    4020 Powershift parts?

    Thanks man too late, but you knew more than the JD parts guys... You are right though, the early shaft had no bushing. The wear made me think it should have one, but with a new ring and plug on the shaft it was a good fit. It is a customers tractor, and he wouldn't go for that for sure. Also...
  3. J

    4020 Powershift parts?

    That is what I am thinking, but had parts man at the dealer where I used to work PartsExpert the dimensions and they are dissimilar to the ring at the end of the shift. The brake/C3 pack is still in the transmission, but the end of the C1 shaft was mangled and need to get a new bushing back...
  4. J

    4020 Powershift parts?

    I am trying to find the bushing that the back end of the low range shaft that comes from the clutch pack towards the rear rides on. The s/n is 108xxx, so early. It is the end of the C1 shaft with the ring and the drive in plug. Can anyone find this part number? The shaft is R33117, the...
  5. J

    Ztrek Charging system

    As a general rule you have to have twice in VAC what you want DC. The rectifier is a switch if you will that is only on 1/2 the time. Yes you need the aforementioned ground due to a plastic mounting otherwise. Do the continuity checks he gave earlier to check the stator. Unhook it from the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top