Recent content by jude116057

  1. J

    2-105 throttle shaft

    The throttle shaft on my 2-105 leaks at high rpms I did tighten it a bit but did not stop the drip is this a hard fix?? Thanks in advance
  2. J

    white 251 disk

    i recently purchased a white disk model 251 from a neighbor. it was bought new at tinker implemenets in fairview indiana around 1974. it has had an easy life sitting in a barn having only about 100 acres of service. it measures 9'6 on the back gangs. i haven't seen any of this model on...
  3. J

    paint for 2-105

    what paint would ya'll recommend for a 1977 2-105? also where is the best place to acquire the decals? thanks in advance
  4. J

    1855 hydraulic valve

    thank you got them ordered
  5. J

    1855 hydraulic valve

    the outer valve body on my 1855 has a large plug in the front side that is leaking bad when the lever is moved is this sealed with an o-ring or a crush washer ??
  6. J

    oliver 1955

    i recently purchased a 1955 so i now have a 1655, 1855 & 1955. my question is one i should know but where does the additional HP come from on the 1955? is the turbo bigger is the pump set to deliver more fuel or a combo of both? forgive my ignorance but after i get your responses i will no...
  7. J

    1855 electrical gremlin

    recently had sheet metal off the 1855 for some leak repairs and replaced the sheet metal. the following morning wanted to move the tractor and it would not start, acted as though the batteries were dead? batteries tested fine and in my hastiness i grabbed my sleever bar and crossed the starter...
  8. J

    1855 ability

    looking to purchase a chisel plow but not sure what my 1855 can handle any suggestions will be appreciated
  9. J

    oliver 1855

    i have a fairly new to me 1971 oliver 1855 diesel. the thing starts great and actually sounds great. the issue is power, it feels very sluggish and seems to struggle on my kuhn discbine? it pretty much smokes the entire time i'm mowing hay and betches it out pretty good if i encounter a hill...
  10. J

    1655 injection pump

    yes i put a 310 in 1655 out of a 1755 and have the complete 283 original to the 1655. just thought if pump off the 1655 would work for the 1855 i would get it rebuilt and have it handy
  11. J

    1655 injection pump

    the 1855 is running fine just thought it would be nice to have one on the shelf to prevent excessive down time during hay season. and being that the 1655 has a 310 it should work for either one i would think?
  12. J

    1655 injection pump

    thanks for the reply my 1855 is a late 1971 model but i will look at the pump number when i get home is it located on the metal tag?
  13. J

    1655 injection pump

    i have an injection pump off of a 1655 can this pump be rebuilt to work on an 1855?
  14. J

    1855 front wheel size

    what is the correct offset for the front wheels on an 1855, m.e. miller has 25/32 that sound right?
  15. J

    looking to buy

    switzerland county, do you have an oliver for sale?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top