Recent content by Ken Hoover

  1. K

    Anyone have a working MH 22

    Thanks so much. I ordered a new 3 position switch and some new wire and will run it like you provided. Look a lot like my service manual route, just can't understand why i need the switch so much since I have no electrical loads except for the cranking amps it used. No lights installed...
  2. K

    Anyone have a working MH 22

    It does NOT have the 3 position switch on the dash shown in the electrical diagram, just a common push pull switch. I do not know if it ever had the 3 position and someone replaced it, or it never had one since this tractor never had lights. Your guess is correct. 6v system with cut out...
  3. K

    Anyone have a working MH 22

    I have a 49 MH22 with a generator issue. It did not have any electrical loads. Lights were an upgrade then. It has a Autolite 4804B generator and cannot find a replacement or refresh kit. If you have one with a good generator, how is the field connected? To case? or? Armature goes to gen...
  4. K

    Charge Generator

    Wow, that's a lot of good information. Using your info, I would think the ending B in GMB4804B, means its a B class, but I assure you it has 2 wires coming out of the case and, when I could not find a replacement or parts, I opened it up and checked continuity from one brush post to one external...
  5. K

    Charge Generator

    Me too. The fan is definitely turning clockwise when viewed from the front and when the generator is off the belt, it also turns clockwise. Is this an indication the Prestolite generator is negative ground? My tractor has had the Autolite my entire ownership and positive ground.
  6. K

    Charge Generator

    I have an Autolite GMB 4804B generator that I could not find a replacement or rebuild kit for when I discovered it was not charging the battery. I found a hit that a Prestolite GHD 6001 would fit my tractor, but did not say it would work on my 49 Massey Harris 22. My current gen is positive...
  7. K

    How to connect the generator/cut out

    I did not realize that a guest cannot add a photo, so if you can help me and are willing to provide an e-mail address, I can forward the photo that I am referring to in my original text.
  8. K

    How to connect the generator/cut out

    I have a MH 22. I am trying to re-install my generator after a considerably long time of being off line and I am unsure how the wires go anymore. In the picture there is a wire that appears to come out of the internal part of the generator. I think that is the armature but not certain. When my...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top