Recent content by Larry Bennett

  1. S

    977h problem

    We have a 977h cat that hasn't been ran in several years, it had a bad bearing in range trans,we fixed that and now the steering clutchs won't work, tried adding oil but doesn't help, spits air out bleeder any help would be appreciated
  2. R

    OT - this month's little project

    Pouring an 8 ft by 12 ft cement slab behind my sister's trailer. Took most of a month from planning to "almost done". Most of that was getting schedules aligned to make it happen. 10 yards of sand to level the yard and build a base. 5 yards of top soil to hold it in and grow grass. Loader...
  3. L

    Belly Mower for CA

    Thamks for the good info,I will go see the dealer next week and get it priced. Thanks again Larry
  4. L

    Belly Mower for CA

    Thanks all for the responses,I now have a good place to start. Larry in Texas
  5. L

    Belly Mower for CA

    Hello,I have a 1952 allis CA and have been using a pull type mower for about 20 years.I think I could get a better finish cut with a belly mower.What is the most common belly mower that has been used on the CA? any one have one for sale? as always Thanks Larry
  6. L

    UTI Cab

    Hello, I have a 1948 MM UTI and I would really like to put a cab on her.Any one have any sources,or ideas? thanks Larry
  7. L

    1960-560 LP Farmall

    A neighbor wants an 560 {not running}out of his yard.He said it is his brother in laws and to please just make him an offer that he will pass along.Tires are in good shape starter out,but there.Are the lp versions of the 560 rare? Whats a good starting offer? as always thanks for the help. Larry
  8. L

    John Deere LX 279

    I got the LX279 corrected,After I did a comp. test both cyl. at 170 I decided to check the oil and found that it was slightly overfilled maybe 1/5th of a quart.that is all it took to bog her down.Remember the old saying,I would rather run it a quart under than a quart over.
  9. L

    John Deere LX 279

    Thanks for the reply, your suggestions are a good place to start. Thanks Larry
  10. L

    John Deere LX 279

    Hello, I have an LX 279 with the water-cooled Kawasaki engine,the engine struggles,slows down and dies as soon as I put aload into it.I have tried cleaning the underside of the deck and raising the cutting height but does not help.Any one with any ideas? thanks for the help Larry
  11. L

    JD 1020

    Thanks for responding,most everthing I have read about them agrees with you,it might be worth fixing, thanks again.Larry
  12. L

    JD 1020

    Thanks for responding,most everthing I have read about them agrees with you,it might be worth fixing, thanks again.Larry
  13. L

    JD 1020

    Hello, I got a chance to buy a 1020 in decent condition,engine turns over but will not start.Is the 1020 a good series?is this machine worth messing with?What would be a fair price to pay? thanks as always Larry
  14. L

    CA 3 point

    On my 52 CA the lever on the pump operates the arms as well as the pully and remote .
  15. L

    MM UTI LP

    My 1948 UTI has the muffler coming out of the manifold pointing down
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top