Recent content by Larry Finley

  1. L

    JD 830 pony motor wiring

    In the wiring that comes from the starter switch in the dash there are 3 wires for the pony motor. One goes on the solenoid with the cable from the battery and that I have identified and is not a problem. Another goes on the solenoid on a small post by itself and the other goes to the...
  2. L

    JD 830 pony motor

    I am in the process of reassembling the the transmission and clutch housing assembly to the pony motor. What do you need to do in order to get the splines of the clutch shaft to engage with the hub of the clutch disc? Thank You.
  3. L

    JD 830 pony motor removal video

    I have been told that there is a video on the proper procedure for removal of a JD 830 pony motor. Is anybody aware of such a video and how I might find it?
  4. L

    JD 830 pony motor oil leak

    My 830 pony motor leaks oil. Oil comes out from under the pony motor near the starter. I'm assuming this is the crank shaft seal? Anybody have any other ideas? Any ideas, short of replacing the seal, on how I might remedy this problem?
  5. L

    JD 830 pony motor exhaust pipe

    The pony motor on my JD 830 2 cylinder diesel has a exhaust problem. The exhaust pipe that fits into the manifold on the pony motor is loose fitting and so there is much leakage of exhaust. Any ideas on how I can correct this problem? Thank you for any help you can provide.
  6. L

    830 diesel 2 cyl. power steering

    I removed the power steering unit from my 830 diesel, replace the bottom seal and then reinstalled the same. Now the power steering works well when I steer to the right but works poorly when I steer to the left. Any ideas what the problem may be and how to correct it?? Thank you in advance for...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top