(800) 853-2651
SHOP NOW

Recent content by Larry Wallace

Yesterday's Tractor Forums
  1. L

    960 steering seal

    Sorry Lynn! I hoped I would be able to help you out. LW
  2. L

    960 steering seal

    Please post back if this helped. Thanks. LW
  3. L

    960 steering seal

    Lynn, I forgot that there is an early model pedestal and a later model pedestal. The seal part number I gave you will be for a later model pedestal. Therefore, machines prior to serial number 110986 will be the early model. Serial number 110986 and after will the later model. If you have a...
  4. L

    960 steering seal

    23710 Small Bore Seal. I did the search. Anyway, IF the pedestal on your 960 is the same as my 1959 961 then this may be a suitable substitute for you. Mine is still holding well. Please post back if this works for you. If the one on Soundguy's machine goes out then this will help him too...
  5. L

    960 steering seal

    Soundguy is correct! In the archives look up "Pop! gear lube leaking from pedestal." Later I posted the part numbers of the bearings and seals I used to repair my pedestal in my 961 when it gave way. I hope that will help you. Larry Wallace
  6. L

    GB in MT, Carb Shack, Appreciation Post!

    I wanted to publicly express my appreciation to GB in MT for his exceptional work and exceptional customer service while rebuilding my Marvel Schebler carburetor for my 8N. It works just as good as it looks. This morning he and I finished up this project over the phone with a very minor...
  7. L

    Rebuild and Gasket Kits?

    Howdy! I am usually over on the Ford forum but I have a question someone here may be able to answer. Can someone tell me where I can find a rebuild and a gasket kit for a 1953 WD9? I know a person who is looking for these, if available. Thanks for any guidance you can provide. Larry Wallace.
  8. L

    9N road trip?

    ScoutB, Drive er! Take all of the advice already posted and GO! Got a cell phone? Take it if it will work in the area just in case you need to call for back up. You love it! You get to see all kinds of stuff when you are driving 14 mph. Enjoy it. LGW
  9. L

    For..Larry Wallace, TSX241B, Carb Shack anniversary carb

    Thanks Gary! Heavens to mergatroid! Putting the carb in the picture on my N Ed will be like putting a diamond in a goats rear end. Thanks for taking your time with it even though it has been very hot out there in the Carb Shack. Congratulations on the anniversary and many more I hope are in...
  10. L

    Speaking of Distributors, Dazed and Confused

    Zane, "Take the center wire from the distributor that comes from the coil. Hole that wire close to the engine metal somewhere / anywhere and with that screw driver open and close the points manually to see if fire jumps from the high tension wire coming from the coil. If it does but...
  11. L

    Speaking of Distributors, Dazed and Confused

    OK Thanks Zane! I got this written down cause I gotta small brain. I'll let you know what I come up with. That Ol' metal building is hot enough to get person to having a VisionQuest! Thank you for your time. LW.
  12. L

    Speaking of Distributors, Dazed and Confused

    Thanks Dell! It pretty hot here today and thinking about pushing a tractor, even a foot, has got me sweating more than a hen getting ready to lay a square egg! But, a person's gotta do what a person's gotta do! I'll stay in touch! LW
  13. L

    Speaking of Distributors, Dazed and Confused

    Yes, it does, thank you. LW
  14. L

    manifold

    Roadteck, I suggest you consider using Permatex Ultra Copper sealant. It has been recommended on this forum before by others. It worked very well for me when I replaced the gasket on my exhaust manifold. Good luck. LW
  15. L

    poor parts

    Glenn D, Thanks for the comforting post. ;-) LW
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top