(800) 853-2651
SHOP NOW

Recent content by levi gibson

Yesterday's Tractor Forums
  1. L

    electric water pump

    i am thinking about a electric water pump on my G6 moline i went up to the barn tonight and pulled the dipsitck out and found it was about 3 inches over full. I drained 3 gallon of antifreeeze out of the oilpan and pulled the cover i have over the hydraulic oil pump drive port and can see it...
  2. L

    G 950 broken cast rock shaft

    I was plowing with our set of 4 bottom IH roll over plows today and the cast bracket that holds your rockshafts broke off where it bolts to the rear end case. Has anyone ever had this happen and any ideas were I could get one in or around pennsylvania thanks
  3. L

    gvi governor not working properly and need more RPM's

    that is the old style governor that is used on the u and g models i am building a puller and this governor has an external spring that is tightend up by pulling the throttle seems to get tight but the tractor opens up to 1800 and then slows back down to about 1500 and doesnt open back up very...
  4. L

    gvi governor not working properly and need more RPM's

    i am in the process of building a GVI with a 605hd gas engine in it i cant get more than 1800 rpm out of this pierce governor. my u i lighted the flyweights to get mor R"s but not sure if that is proper on this one or do you put a stronger spring on it. it seems like i dont have a smooth...
  5. L

    tires for a G 6 moline puller

    thanks i will try and find some traction field and road tires i put my tires on the wide rims it flattens the tread out and seems to pull a little better at least on my MM UTU thanks for the input
  6. L

    tires for a G 6 moline puller

    I am building a set of 18 by 38 rims for my tractor i always like firestone traction field and road tires but you cant get them any more i have heard guys saying they liked the new super all traction II tires wondering what is the best tire to put on a open antique tractor like this with out...
  7. L

    Pressed steel wheels on G705

    I want to make a set of 38 in how thick of plate did you use and did you notice any flex or wobble in the plate I plan to pull 8500 and 9500 with my GVI
  8. L

    Pressed steel wheels on G705

    I am also looking for a set of 9-bolt hubs for my Gvi If anyone has the phone number for the guys that makes them please post it
  9. L

    G705 turbo

    I am thinkong about putting a turbo on my G705 Diesel. It has the 504 hd engine in it and I was wondering if anyone has any tips on adding a turbo to this engine. I don't want to blow head gaskets all the time or ruin a good tractor if this is a bad idea. Any ideas are good pictures of a...
  10. L

    turbo on G705 diesel

    thanks I would like to try it on this tractor and see if I notice much of an increase. Good to know that it has been done before hate to wreck a good tractor for no reason. I would like to see some pictures if anyone would have some with the hood off to get some ideas for fabricating my own...
  11. L

    turbo on G705 diesel

    I have a g705 diesel with the 504 hd motor in it I was wanting to try a turbo on this tractor i was wondering if anyone has ever done this what kind of turbo i should look for I want to keep the turbo under the hood I dont want to blow head gaskets or blow it up. How much boost can you run to...
  12. L

    low low first gear for utu

    Did moline ever make a slower first gear than first gear for a utu I want to slow my mine down for dead sled pulls and was wanting a half speed first gear I was thinking about if I could take 3rd out and change it would suit me the best any Ideas are useful
  13. L

    blue paint for super a cultivators

    Thanks for help with this I will try and post some pictures when we finish them
  14. L

    blue paint for super a cultivators

    I am restoring my greatgrand dads farmall super A that he bought new and am needing the blue for the implements I like rustoliem paint but not sure what color it is I have seen dark blue and lihgt blue but I think it is to be dark blue but not sure any help is useful
  15. L

    moline ub with a 425

    The reason for the question is I bought a GVI with a good 425 in it and a 605 power plant motor to go in GVI so i have this 425 that I need to find a use for, I though a ub would be a nice set up so I could run a saw mill at a tractor show or haul wagons around the farm and I can pick up a ub...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top