Recent content by Lew in UT

  1. L

    steering priority valve stuck

    about 10 years ago I parked my 856 IH and to day I started it for the first time as I thought it started on the first revolution of the engine the TA. works good 3 point and hydraulics work good, but haven't anney brakes or power steering. apparently the priority valve has stuck open...
  2. L

    overheating

    what I usually do is go barrow 1, or 2, cups of C.L.R. from my wife drain the antifreeze out and fill with water add the C.L.R. run for about one hour or tell hot, let stand for an hour or two! drain and see what it look like if its real bad! you mite have to repeat. It will remove as its name...
  3. L

    Hy Tran oil

    I'm not certain what the difference in price is but wal-mart has a tractor hydraulic oil that is as good as anney I use it in all my tractors my old 4586 IH has never had anything else in it sens Ive had it it will Dino 320HP anney time I want to put it on a Dino the trans. Hyde. haven't bean...
  4. L

    H rear wheel centers rusted on

    if your good with a 4# hammer take a good sharp chisel and split the sides nuts on the U bolts. when you've cut them half way threw Thea should turn of easel once they are loos beat on the inside of the hub they should move some use lots of penetrating oil and keep up the good work with the...
  5. L

    O T Wallpaper Border 10-20 Tractor

    I agree it probable a 15-30 as soon as I saw this page went out side my house and looked at my except I'm short a hood and left fender every thing else looks the same I could use a hood and fender if someone out there has one.
  6. L

    Chip Foose 4020

    be kind enuf to list JD webb addres for me would you
  7. L

    John Deere steering wheel restoration

    Try amorally, or tire cleaner. from wall mart.
  8. L

    Chain Links for Manure Spreader

    realise all the tension of off the Chane beaned the Chane tell it stops,(torde) the opening in the female part, of the Chane, when you cant bend the Chane anney more hammer the male part threw the female link this is whear a large hammer and a heavy Waite to hammer against and a lot of...
  9. L

    Cylinder pressure for 1944 farmall h

    glennster your quite right also some times if you oil the cylinders and the pressure dos not com up it can be a leaking past the valves
  10. L

    Farmall H Stalling Problem

    one of the worst problems with a single barrel carb aether up or down draft is icing up on the in side of the carb throat rap with insulation you can see frost on the pipe between carb and manifold
  11. L

    Farmall H Stalling Problem

    one of the worst problems with a single barrel carb ether up or down draft is icing up on the in side of the carb throat rap with insulation you can see frost on the pipe between carb and manifold
  12. L

    farmall h

    if this is happening in the winter your crab is possibly icing up on the inside, rap the area between the crab and manifold with some insulation, it can happen in worm hummed whether to
  13. L

    Shift Lever M

    this is a problem with all the older tractors and especially old agzeler transmissions in trucks some will disagree. but hear go's if you are a bit good with acetylene torch take a electric chromium type hard surfacing rod brake the flukes of the out side , grind the Warren part and grind it...
  14. L

    transmission question / mower drive question, fluids

    I don't think that its a good idea to change types of fluids tractor differential & hydraulic oil is probably the best you can git it is formulated for this purpose, no reason to have two types of oil seating around your shop. Lew.
  15. L

    Farmall M sparkplug preffrences?

    Would you have an addres for the Aldoring plug you menchend Lew
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top