Recent content by Manchesterjake

  1. M

    Sherman backhoe cylinder seals

    Sherman 54B was made by Wain-Roy. The original pistons were supplied by Hydreco. They should be stamped on one of the ends under the paint
  2. M

    Re: Sherman backhoe on TO30

    20 is the problem. Way to much flow and the HP requirements stall the tractor. More realistically its more like 7 gpm-ish. The purpose of the tag is to find out what the flow rate of the original pump was. This post was edited by Manchesterjake on 02/04/2022 at 04:14 pm.
  3. M

    Big Thanks to "Old' ......

    I am looking for the data plate for the pump that runs a 54B if you could take a picture.
  4. M

    Sherman Back Hoe Measurements And Material Help Request

    Did you ever get your measurements? I have a 54B
  5. M

    Sherman backhoe cylinder seals

    I am looking for information on the data plate for the pump on a 54B. Can you help?
  6. M

    Re: Sherman backhoe on TO30

    I cannot read the tag.
  7. M

    hydraulic valve question - Sherman backhoe

    This message is a reply to an archived post by MeAnthony on May 09, 2020 at 04:24:54. The original subject was hydraulic valve question Sherman backhoe. I have a 54B that has been in the family for over 40 years. I just acquired it from my great Aunt. I am in the process of restoring the...
  8. M

    Parts Source For Repacking Sherman 54B Cylinders

    This message is a reply to an archived post by 8NChris on July 31, 2020 at 11:16:26. The original subject was Re: Parts Source For Repacking Sherman 54B Cylinders. Could you please send me a picture of the tag on that pump. I am looking for information on that exact pump.
  9. M

    Re: Sherman backhoe on TO30

    What is the specific hydraulic pump you have powering this backhoe?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top