(800) 853-2651
SHOP NOW

Recent content by Mangosteen

Yesterday's Tractor Forums
  1. M

    Searching for rear light bracket Case SC 5423A

    Hi collectors I am in search of one more light bracket that mounts on a rear fender of an SC or LA Case tractor. The part number is 5423A. It looks like a ring mounted on a two hole platform with a notch on the ring. Trying to mount lower headlights for orchard use on my 1949 S is all. Does...
  2. M

    Autolite Generator Squeal Case S 1949

    Problem solved. AER Rebuild out of Michigan has every thing. All I did was give them my model number. New bushing, bearing for the pulley end and brushes on the way via EBay.
  3. M

    Autolite Generator Squeal Case S 1949

    Hi I am having a constant squeal from my Autolite generator. Its a GHD 6001 C MODEL. I took the band off and honed the rotor. Took the small sized end cap off and put some oil on the bushings. Did not see a wick from the port that was open. Maybe its on the inside. I would have thought that by...
  4. M

    Found New Rear Tires for Case S 12.4 by 26

    Yep. Typing mistake. They are indeed. The price is around 500 each from Fountain Tire.
  5. M

    Found New Rear Tires for Case S 12.4 by 26

    Found a new pair in Vancouver. BTX brand. They still make them. You don’t have to look for Old combine tires.
  6. M

    Case S unable to get into Second Gear

    Hi I have a 1949 Case S which I just brought home and all gears work fine except I cannot get into second gear. It slips in about half way and hits a solid block. Tried rocking, feathering clutch, different RPM,s etc. Removed the gear shift lever ( two bolts ) and see the slots but have not...
  7. M

    Case wheel Weights

    Hi I am interested. Can you please post a photo. Where are you located.
  8. M

    Case wheel Weights

    This message is a reply to an archived post by az gary on September 06, 2019 at 16:31:23. The original subject was "Case wheel Weights". AZ Gary do you still have the weights for the Case S?
  9. M

    Fergie Positioner for Ferguson TEA 20

    Hi I am trying to locate a Positioner device for my Ferguson TEA 20 from 1951 so that I can keep my rear forks about a foot off the ground while hauling pallets. Does anyone know where I can buy one. I had heard there used to be one on Australia about ten years ago. Not sure if that?s...
  10. M

    Case 1494 Value

    Hi All I have a Case 1494 tractor with an EZ ON front end loader. I am in Alberta. It's a two wheel drive all red and has less than a thousand hours on it. Been stored inside for the last 20 years. What would the value of something like this be. Can ship south.
  11. M

    Unstyled B rear Transmission Plug Square Drive

    Back at the location now where my tractor is stored. Have the 3/4 inch drive ground down now to fit perfect and snug with tool bottoming as it should. Final question. Should I use an electric impact on it or is that too risky for the cast iron plug? Or is it better simply to use a pipe to...
  12. M

    Unstyled B rear Transmission Plug Square Drive

    Here is a better photo showing how far the tool got in. Would the filing be done on the plug or on the drive?
  13. M

    Unstyled B rear Transmission Plug Square Drive

    Well with the 3/4 inch drive half engaged I gave it my best pull possible with 18 inches of leverage and no go. What do you guys recommend the next step is. A. Extend the leverage an extra foot B. Soak it for a few days by spraying some penetrant. Although with all the oil leaking I thought...
  14. M

    Unstyled B rear Transmission Plug Square Drive

    Thanks for the quick support on here. I bought a 3/4 inch drive and corresponding handle. It only sinks in about an eighth of an inch. Took a chisel to scrape away any rust. Not much. It looks tapered a bit in there as you get deeper. If it's cast, and I try tapping it in further am I at...
  15. M

    Unstyled B rear Transmission Plug Square Drive

    Here are the photos
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top