Recent content by Massey23

  1. K

    185 hyd problems

    My 185 has always had problems with loader and steering when cold. This year is worse than ever. When cold the loader is jerky and the steering is jerky. The colder it is the worse it gets. Changed filter and oil no better. Once the tractor runs awhile and warms up the problem gradually goes...
  2. A

    511b lift arms (update)

    Thanks guys for the info on my lift arms not going down, yes it was the linkage, not the rollpin as Nutty suggested, but the cross shaft was loose on the link to the spool. Instead of tearing it all apart I just Dutch keyed it. works like a champ now. I got my 3 pt. disc on there and it just...
  3. M

    Leyland 154

    Does anyone know the years of Manufacture of the Leyland 154 tractor? Is there a website with specifications? Thanks
  4. M

    MF40 Industrial PS fluid/PS weak

    Thanks. I will try it tomorrow!
  5. M

    MF40 Industrial PS fluid/PS weak

    The manual for my MF40 Industrial with a 3-cyl Perkins gas says to use "M-1129A" lubricant in the PS reservoir. It is the same thing recommended for the differential, etc. Does anyone know what it is or what equivalent I can use in the Power steering unit? The PS recentlt became slow and weak...
  6. M

    TO35 PTO Lever stuck

    John I removed the lever and cover plate today. I cleaned and lubricated it and re-assembled it and it works fine now. It seems the detent was stuck in the "ground" position. Thanks for the help
  7. M

    TO35 PTO Lever stuck

    Thanks John. I will check it out tonight
  8. M

    TO35 PTO Lever stuck

    TO35 PTO lever only moves from "neutral" forward to "ground" but not back to "Engine" Also, the ground PTO seems to be engaged in both neutral and ground positions. Any suggestions on how to get the lever to move back to "Engine" pto? It worked 2 or 3 years ago when last used.
  9. M

    My first tractor - old Massey Ferguson 135 (but what year ?)

    Miner09 any other Narrow Front F40's you know of? I get no answer at the number you posted.
  10. M

    F-40 Power Lift

    Can you post a couple photos? WHat are the first 3 digits of the serial number? SGM, RGM, etc? THanks
  11. M

    F-40 Power Lift

    Did you buy that narrow front F40?
  12. M

    F 40

    miner09: If you are not going to buy it please let me know about it. I am looking for one like that. Thanks
  13. M

    Mustang Standard Photo

    Here is a nice original condition Mustang Standard Tractor. Hard to find the standard version! Mustang Standard Original Condition
  14. M

    massey 23

    What are you asking? Thanks
  15. M

    mustang

    Let me know what you want for it.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top