(800) 853-2651
SHOP NOW

Recent content by Mattoney01

Yesterday's Tractor Forums
  1. M

    Case 385 Water Pump

    I agree. Ill just go and order one from here. Right around $80 for a new one so not bad. Judging by your name I see you may be from Ky. Thats where Im from as well.
  2. M

    Case 385 Water Pump

    Is it normal to have some play in the water pump pulley or shaft? I wouldnt consider it wobbly but you can move it in/out by hand. I noticed a rattling noise coming from the front of the tractor earlier. I thought it may have been a loose panel or something but its definitely coming from the...
  3. M

    Fuel Pump issue? 67 2000

    Well I was convinced but now I m not so sure!! I think the best plan of attack would be to get it looked at by someone who knows for sure. I appreciate the guidance on this. It s very much appreciated.
  4. M

    Fuel Pump issue? 67 2000

    You just pointed to the exact blue line I m talking aboutIt s hard to see in the picture but it s not straight across at all and it s obvious when you see it in person that someone has done that themselves. The only area of the pump where the paint is wore off substantially is in the area the...
  5. M

    Fuel Pump issue? 67 2000

    I ll have to look into that. Here s a picture of my pump. I can t tell where the mark should be on the pump itself. That blue mark is something someone else transcribed so who knows what this pump is actually set to at the moment. The blue mark is placed just above the 2nd notch.
  6. M

    Fuel Pump issue? 67 2000

    I ve spoke to a gentleman who has a 4000 with the Rossamaster fuel pump. He was having this exact problem after he took his pump off and rebuilt it himself. What he found was he installed a shaft on governor fork backwards so his governor wasn t working properly. Something I should have...
  7. M

    Fuel Pump issue? 67 2000

    Bern, I was able to advance the pump 2 notches and I can tell a noticeable difference. It s idling much smoother and not smoking near as bad. When I first started it after rotating the pump it smoked for a bit but once I got the engine warm dragging my blade the smoke cleared up. I wouldn t say...
  8. M

    Fuel Pump issue? 67 2000

    Ah ok. Gee no wonder she was running rough when I rotated it away from me! Thanks Bern, I ll try that and report back tomorrow.
  9. M

    Fuel Pump issue? 67 2000

    It doesn t have any issues with a cold start. If it s really cold out it takes some cranks but otherwise it fires up fairly quickly. I ve tried in both directions but to be fair I don t really think I ve given this a solid effort. I ve tried a couple times leaving the fuel lines on and by...
  10. M

    Fuel Pump issue? 67 2000

    Good evening everyone, My tractor is blowing white smoke from the stack. I ve replaced all 3 fuel injectors and it didn t help. I ve tried to adjust the timing on the pump and that hasn t helped. When you start the tractor in the building your eyes will begin to burn fairly quickly from the...
  11. M

    67 Ford 2000 Top Lid Rebuild

    One of the reasons I was trying to get to this was to access the ORing on the suction line. From what I can tell there s an ORing that seals the suction line as the tube runs from the outside of the tractor to the hydraulic housing. Ive attached a picture from the manual part number 58. While I...
  12. M

    67 Ford 2000 Top Lid Rebuild

    It didn t seem to want to come out. I didn t pry too hard on it but it did seem to be some sort of hanger or mounting pieces for the end of the filter. I left it alone. I don t believe it ll hurt anything. Thanks Sean!
  13. M

    67 Ford 2000 Top Lid Rebuild

    What in the world could this be? This is wrapped around my suction filter. It s not rubber. Feels more like thin metal. I wanted to try to take this filter out and inspect it but it doesn t seem to have enough clearance to be able to take it out. I m going to try to get these removed but couldn...
  14. M

    67 Ford 2000 Top Lid Rebuild

    Thanks. Well, mine wasn t that hard to remove because the force of whatever jammed the tube down into the casing pretty well took care of that for me! Lol, I m going to stop by tractor supply tomorrow and get a pack of assorted snap rings and pick out the one that fits the best as a replacement...
  15. M

    67 Ford 2000 Top Lid Rebuild

    The local dealer wasn t able to help. Apparently the vendors they used didn t carry a relief valve for a 67. I looked through my shop manual and looks like in 65 Ford installed the relief valve I currently have. In 68 Ford switched to the relief valve that s pretty readily available across...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top