(800) 853-2651
SHOP NOW

Recent content by Mike Jamison

Yesterday's Tractor Forums
  1. M

    IHC grey paint codes

    Thank you guys, I will try those numbers and see what I can get. As for any original paint, can't find any on the tractor for sampling, that would have been the best. Thanks again!
  2. M

    Farmall grey

    Anyone out there have paint codes for Farmall Grey for an early F20? The old Dupont numbers not working with either of my paint suppliers.
  3. M

    IHC grey paint codes

    I am wanting to paint a 1935 F-20 grey, but the old Dupont paint codes won't cross. I have codes 97625, 27625, and 98620 options. Anybody out there have codes that work?
  4. M

    baker multi valve

    If your A has the standard pto operated hydraulic system, it doesn't matter. Install new new gaskets A1447R available through JD. You will have to modify the seven bolt holes in the gasket from 1/2" to 5/8" to slip over the stud extensions that will be under the baker valve. The outer gasket...
  5. M

    baker multi valve

    I thank everyone who helped with info that is both old and sometimes obsolete. I had installed several of these just NOT on an A with live power conversion. They are fed differently and yes, there is a 9/16 drilled passage on the bottom. One of mine had retractable screws and I had to modify...
  6. M

    baker multi valve

    Thank you! Only thing I lack is in finding the 3/8 hole near bottom they refer to. I have three of these including the one I am installing on this application, and none have these holes. There are along the side where your outlets would be piped, but powering any of those would in turn bypass...
  7. M

    john deere 70 standard paint

    In my shop, I use the John Deere classic green with a Dupont Centari hardener that I love, but it is expensive at nearly $100/pint. These acrylic enamels have been around several years and stand up well. I have been happy with the paint I get from Deere, and at $95/gallon, one of the cheaper...
  8. M

    baker multi valve

    I am installing a baker multi valve on a '52 A with ad on live power kit. When I took power troll off, I found that the block off plate that should have been installed when they put on live power hadn't been. Installed one, have pressure in powertrol, works rock shaft, but no pressure in baker...
  9. M

    Oliver/Hart Parr's from Mount Pleasant, IA

    Thanks for the pictures Jim. I"m especially grateful since the last photo in your collection of the Hart Parr 70 is mine. It originally belonged to John and Ted Morrison of Morrison Implement of Columbus Junction, Iowa and used at their summer cabin on the Cedar River. This was my first time...
  10. M

    twin cities sheet metal

    hey thanks guys for the info, I'll check on your leads.
  11. M

    twin cities sheet metal

    I have a Twin Cities 21-32 FTA in restoration that has rough fenders and hood looking for someone making reproduction pieces for such, what are my options out there, thanks!
  12. M

    twin city jts

    Looks like a fine project. Working on a FTA 21-32 and would really like to get some new fenders and hood for it. Ones I have are workable, but it is so much easier in my opinion to find someone making new units.
  13. M

    Case tachometer

    We are looking for a new tachometer to fit a 930 CAse tractor and haven't been looking in the right places I guess, any out there? John Saeli, I saw you responding to some messages and was reminded that I've gotten some fine parts and info from you in the past, do you know of any? Thanks.
  14. M

    timing

    Thanks for response Tom. Asked this question for another friend's project, had an F-20 in front of me but not the F-14 to find marks. Yes you are right, everyone has their methods, just prefered a more "spot on" approach than looking thru spark plug hole or using a wire to feel piston motion...
  15. M

    RC Case experts

    By the way, not a Case expert but have several CC's a '39DC and 700 Gas Std Special. Case tractors fairly cheap to buy, hard to get repro parts for and resale value not what a Deere collector used too, just haven't had the following the Deere products have enjoyed. Redoing your RC would be like...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top