(800) 853-2651
SHOP NOW

Recent content by mkr730

Yesterday's Tractor Forums
  1. M

    John Deere 630

    Thanks for your reply. I was referring to bearing fit to housing. Not sloppy loose but could get bearing out without tools. The dial pin is still tight and the dial pin hole is not elongated from movement. Some folks say they never change mains in 2 cyl tractors unless they are in terrible shape.
  2. M

    John Deere 630

    Pulled the main bearings out of the 630. Both bearings have lost their press fit tightness but not sloppy lose at all. The right journal has a slight ridge just left and right of oil passage, Machine shop said clearance after wear is now .011. Just wondering could these bearings last for light...
  3. M

    1977 International 140

    My ignition will not kill the tractor. When switch is turned off coil is receiving power from alternator. What do I have wrong? When turning key on and off with tractor dead the power wire running to resistor on alternator is powering on and off just as it should. Please help.
  4. M

    John Deere 630

    I have run into trouble with the governor. I have a chipped bevel gear that mates with the fan drive pinion gear. I called myself rebuilding as per repair manual but failed in some fashion. Tractor ran and operated great. Tractor had a leak around governor housing so i decided to redo the...
  5. M

    John Deere 430 PTO noise

    Only makes the noise with pto engaged and going down hill. Same noise on two different tractors. No noise at all without pto engaged.
  6. M

    John Deere 430 PTO noise

    I have a 420 and 430 that I use with a bush hog. Both tractors work great until Im going down hill and the weight of tractor seems to be pushing against the gear speed. When cutting down hill I hear and feel a clunk clunk in the clutch. The 430 has all new bearings in tranny. Neither tractor...
  7. M

    John Deere 630

    I did notice in the short time the engine ran the power steering control valve got very warm. Only ran 15 min. Too hot to touch. I have not had gauges on the power steering system yet. I did steer the system with two fingers using the short shaft coming out of pedestal. I don't have the main...
  8. M

    John Deere 630

    I fired up the 630 for the first time since complete restoration. She ran awesome but I have a few issues. First the power steering pump that i completely went through is leaking fluid from front seals. Yes I replaced all 4 in the pump. Shocked and depressed to see the drips from many long hours...
  9. M

    JOHN DEERE 630 UPDATE

    Got the pistons in and head torqued down and feeling good about progress. That is until I walked by my parts tractor at the other end of the shop and saw the alignment pins that I left out the block. The pins that line the Head to the block. I should have known it went on to easy. Oh well I...
  10. M

    Parts Tractors

    A long day but got three more home.
  11. M

    Parts Tractors

    Sure [email protected]
  12. M

    Parts Tractors

    A few Pictures.
  13. M

    Parts Tractors

    Im not buying any of those. Dont know anything about them. Are there anything rare to look for on those? One of them was flooded as well.
  14. M

    Parts Tractors

    Whats the most you guys would pay for a complete parts tractor. I have an option to buy a few. All complete with three point, Been sitting outside for 12 years and stuck. Most have water running out of dip stick. The group of tractors consist of a 820 that looks decent, Two 630s one with old...
  15. M

    JOHN DEERE 630 UPDATE PHOTOS and few others

    Sorry for duplicates and images being sideways. One step at a time.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top