Recent content by MMDEL

  1. M

    U302 Super Diesel Steering Cylinder

    Somebody has moved the Batt box.
  2. M

    Ampli-Torque

    Is it the high side or low that is weak???? Usually it is the low side, You have to split to repair. Manny times you can prolong the life by not putting in low side on the move. De-clutch the tractor and let the clutch out easy and it should catch and most times you can run all day. If it is...
  3. M

    Minneapolis Moline Harvestor 69 Brochure

    The biggest difference was even layer of crop and sq inches of separation and seive capacity..
  4. M

    U302 starter issue

    Every thing that John and Jocco posted is correct. When that happens on the older tractors with the small solenoid I Just rap them with my pliers and the plunger in the solenoid will release. Put a full size charger on it to bring the Batt up to full charge or jump it with another vehicle...
  5. M

    UTS Belt Pulley

    I have those units.. With or without the Pulley.. Northern Ill, about 100,miles south of Madison. Ph 815.973.4970 If not in a hurry I have a grand daughter who lives in Wasau.
  6. M

    ZTU battery box

    OK now you guys are making me blush. THANK YOU for the compliments. There is a post ahead of this one that is accidental, I tried to cancel with no luck. This is not an MM computor so I am lost.
  7. M

    ZTU battery box

  8. M

    ZTU battery box

    Np problem, that's what I am here for.
  9. M

    ZTU battery box

    Unless you have some sort of a special distributor, you would have to change cam shaft gears.
  10. M

    8 inch RT clutch disc help

    OK we have a lot in common!! I have 2 Rock Island s. We had 4 at one time. I was practicly born on a Rock Island. The 2 I have left are my dad's first tractor Model G2 and my Granefather's F on full steel.
  11. M

    8 inch RT clutch disc help

    I might have a flywheel for you. I have 2 parts R's .Would have to check, neither one is split.
  12. M

    RTU starter options

    Check to make sure the full width of the brush is making contact with the commutator and the brushes are not backwards. If that is OK take it apart again, make sure there are no segments lose on the commutator. If there are no starter gen shops near you any machine shop or someone with a metal...
  13. M

    RTU starter options

    First off an early R wouldn't have a solenoid. someone must of updated it.. So take a good heavy set of jumper cables and hook direct from the Baii to good ground and put the hot cable direct to the post on the starter. In other words bypass the solenoid to see if the problem is the solenoid...
  14. M

    MM U rust in heads

    No way is there any connection between the water passages and the valves.
  15. M

    Recommended Spark plugs for a ZTU

    If you switch out your mag for a Dist. you are going to have to change gears on the camshaft.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top