Recent content by MOLINEdude

  1. R

    John Deere 1020 Hydraulic Problems

    Still have a few questions after cleaning the screen and try to get the filter out. Is there a trick to getting to the filter? Is there some simple way to check that both pumps are at the very least pumping? Also there is a wire on the front pump that is cut. It looks like it is attached under...
  2. M

    RC 77 transmission cover oil cap

    Its a flat top cover that i bought from korves oliver
  3. M

    RC 77 transmission cover oil cap

    Does anyone have an extra RC 77 transmission cover filler plug for either a flat top cover or a hydrolic cover that they would sell?
  4. M

    77 pto removal for pulling

    ok thanks for the info.
  5. M

    77 pto removal for pulling

    rrlund, It has the mechanical lift on the trans cover but im gonna put a flat top cover from korves on it and also the belt pulley delete cover. i read in the manual that the belt delete cover needs an input shaft oil seal,retainer with oil seal,retainer gasket,and felt washer. would you happen...
  6. M

    77 pto removal for pulling

    im in the middle of replacing the clutch in my 1949 oliver 77 and want to delete the pto for pulling. do i have to reinstall any parts after i pull the pto and 5" shaft other than covering the rear hole. im new to the 77 and would appreciate a little help from all you oliver vets.
  7. M

    moline hubs

    does anyone know of a 5 lug front hub that will "bolt up" to a UB's front spindles. im looking to run some aluminum rims. thanks
  8. M

    UB ALUMINUM FRONT RIMS

    any one know where i can get aluminum front wheels for my ub? do i have to change my hubs to a five lug and if so anyone know what will fit?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top