Recent content by Moman225

  1. S

    best cooling system flush for 8n tractor

    Howdy All; Apparently my 8n has had mostly or just water in the cooiling system for a long while. I have flushed the cooling system several times with water pushing water in both directions in the block and the radiator. It is not running hot but shortly after putting 'green' antifreese in the...
  2. E

    Re: 1935 A lost oil pressure

    Maybe cracked or broken filter housing, oil line. Look in the archives on this site. This problem has been a topic many times.
  3. M

    445C Will Not Back Up

    This message is a reply to an archived post by Blue Buddy on February 08, 2009 at 18:40:03. The original subject was "Re: 445C Will Not Back Up". Hi Guys: Co-worker had a 445C that will move in reverse. He blew a fuse while changing his altenator, then it would work forward, but not reverse...
  4. M

    Who makes the best 1500 watt portable generator?

    I know you asked about a 1500 watt, but I have a 3500 Champion bought from Tractor Supply. Chinese rip-off of the Honda engine. Here's the thing. From out the box, it has always started on one pull! It runs for days on end, powering my motor home after my Onan went out. Run 10% ethanol thru it...
  5. M

    International 500C rollers and Front Idler

    Want to pass on a story about good fortune. In my search for the Front Idler parts for my 500C, I stumbled across one new Idler, one rebuilt, and 10 good used rollers. Local to me, about 45 minutes from my house! All with a guarantee! Moral of the story is, keep looking. The parts you need are...
  6. M

    International 500C rollers and Front Idler

    dpendzic: I contacted my local Komatsu dealer, gave them the parts numbers,was told the parts were unavailable?
  7. M

    International 500C rollers and Front Idler

    Hey Guys: Does Berco handle Front Idler parts?
  8. M

    International 500C rollers and Front Idler

    Hi Guys: I have a 500C I am fixing up. About to buy rollers from a gentleman on here, and need to make sure the oil filled rollers will fit in place of the grease-able rollers. Also, where do you find the seals, bushings and pins for the Front Idlers? How do you get the pins and bushings out?
  9. O

    John T I need your help

    Hello , Last week I brought home a little John Deere 3HP engine [Type E]. It seems in good shape, has lots of compression but I cant get any spark. It has a mag and igniter system and I dont understand how that works since the mag has no impulse. However I found that the magnet is broken in two...
  10. M

    Post

    I just didn't know the etiquette of the board. Thanks guys, like I say maybe this will help someone else. I will not call the man's name, but I will try to give enough hints that if you come across him, you will know. Bought an old Oliver backhoe. Knew the power steering leaked. Couple of months...
  11. M

    Post

    May I post a gripe about a shop on here? Looking at possibly saving someone else the aggrevation I have had with a certain individual! Plus to just plain vent! If it is not permitted, I understand. Someone let me know, please
  12. M

    Oliver 550 water pump

    Thanks guys. Appreciate the replies. Don't you love working on old iron? That you acquire from folks? And don't know what all has been done to it? Bought the ole machine, and it would run hot. Determined no cracked block or head and no thermostat. I looked for my old water pump casting numbers...
  13. M

    Oliver 550 water pump

    Hi guys: Excuse my ignorance, but I have a 1964 Oliver 550 backhoe. I tried to order a replacement water pump, but the ones available cut off with the first three numbers at 127. My serial number begins with 144. Any ideas? Thanks in advance
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top