(800) 853-2651
SHOP NOW

Recent content by mopower05

Yesterday's Tractor Forums
  1. M

    GVI with inline pump using Case parts?

    This message is a reply to an archived post by fdt860 on May 11, 2016 at 05:42:08. The original subject was "GVI with inline pump using Case parts?". i have installed a bosch a-pump off of a case tractor, cant remember the model though, on a 504 in a g-1000. not a terrible install. had to...
  2. M

    g1000 to bosch inline injection pump parts

    This message is a reply to an archived post by TERRYDFOSS on March 02, 2010 at 19:55:50. The original subject was "Re: g1000 to bosch inline injection pump parts". terrydfoss i believe i talked to you several years back about changing injection pumps and turbo charging an old 504 in a g-1000...
  3. M

    P-pump m-5

    did the a- pump off or a case on the g-1000 first. will definatly try to go p-pump if i can find a core at a fair price. and yes the cummins would definatly be a better way to go but would rather keep the stock engine in and see what can be pushed out of it. and as far as alcohol, i"ve never...
  4. M

    P-pump m-5

    Looking into building a m-5 diesel turbocharged and p-pumped. Wanted to see if anyone has done this or seen it done. Am currently running a g-1000 with a p-pump,turbo,water-methanol, drilled injectors and around 2500rpm.
  5. M

    max rpms for 504 diesel

    Yes i am still running the energy cells and i am not looking to make more power at higher rpm, just wondering if the engine will stay together. If it will then i will have a little more wheel speed and a be able to keep boost up for a little longer. If i cant turn more rpms then i will either...
  6. M

    max rpms for 504 diesel

    That sounds good. Do you know about how much power you are much power you are making. 2800 would give me a little more room. Do you have different valvesprings
  7. M

    max rpms for 504 diesel

    Have been running turbocharged for about 2 years tractor pulling and haven't had any problems to speak of. Engine was bored .060 over just before building it for pulling. Just would like a few more rpms to keep the turbo spooled.
  8. M

    max rpms for 504 diesel

    Am wondering what the max rpms anyone is running with a 504 diesel. Is 3000 a bad idea. Currently have the engi.e turbocharged making around 25 psi boost with a p-pump and 330-340hp
  9. M

    stiffer valvesprings for 800hd

    Thanks for the help. Gave them a call and got them ordered today.
  10. M

    stiffer valvesprings for 800hd

    I have a gvi with an 800hd that pulls pretty competitively but it will float the valve at around 2400 rpm. Have heard there are stiffer springs to keep from doing this and am wondering where to get them. Thanks for any help.
  11. M

    clutch

    so you think that a double disc would be the preferred way to go. i think my main problem is that i am having to ride the clutch a little to get it to build enough boost to take off. once again somewhat new to this type of pulling. have pulled a lot but never had enough power to run in road...
  12. M

    clutch

    have a g-1000 Moline with a turbo charged, p-pumped 504 diesel engine. have a rebuilt clutch and am weighing around 10,600lbs. i still cant take off in 5th gear low. am not having a problem with 4th low or high. am wondering if there is a slipper clutch, double disc, etc. or what the best...
  13. M

    Valley Mills, Texas Tractor Pull

    yeah i should be there on Saturday. trying to decide if i wanna run the hx-55 i had on it or a hx-40. i guess i'll be making the decision tomorrow.
  14. M

    800hd carburator

    hopefully we will have it ready. just looking for a caruburator and getting the electrical system working. have the engine in the tractor and most of the front end back together. probably try to turn it over today.
  15. M

    800hd carburator

    on the impco 200, do you run stock jets or have you done something to it? i have a impco 200 in the shop and am gonna look for regulators. also are you running a distributor or what are you doing for the ignition system?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top