Recent content by motoOzarks

  1. motoOzarks

    Simms injector pump question

    I have acquired a spare tractor that has a supposedly rebuilt pump. I would like to swap the pump to this tractor and see what happens. I have the shop manual that describes how to remove and reinstall a pump on an engine that doesn't spin when it is off. It does not elaborate any further. It...
  2. motoOzarks

    Oliver 1850 hydraulic

    I bought an 1850 this spring hoping to use it to pull a batwing mower. When I hooked it up it lacked enough hydraulics to lift the wings or raise the mower height. It has power steering which works great even at idle and cold. The 3 point raises, holds, and lowers but I haven't had any weight...
  3. motoOzarks

    Simms injector pump question

    Another question What is this drain for? Fuel or oil? Referencing the fitting under "England". What causes it to drain? thanks
  4. motoOzarks

    Simms injector pump question

    Rainy day so I decided to do some investigating..... 4 out of 6 broken springs
  5. motoOzarks

    Simms injector pump question

    I have changed it. I have not checked the level since to see if it is taking on diesel.
  6. motoOzarks

    Simms injector pump question

    Simms CAV Minimec injector pump on Case/David Brown 1690 I did some cleaning on the injector pump and noticed some puddling of diesel on the third injector "feed". I have looked at parts diagrams but they do not go inside the pump so I don't know what the parts are called. It's not the line...
  7. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    excellent advice.....I lost the need to confirm what was happening when I replaced the neck on the radiator and put in a thermostat. I've not noticed any bubbling since but will watch as I get more time on the machine.......
  8. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    A follow up I fitted a regular radiator tank neck to the radiator with a 7 lb cap and have an overflow hose as is normal. I will mount and attach the overflow tank when I get the chance. I suspected the thermostat had been removed as it was pushing coolant out even when first started, really...
  9. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    I looked online at parts diagrams The recovery tank in the diagrams has a 7 lb cap on it Mine has none and is not made for one So I guess I need to find a recovery tank that takes a pressure cap or solder a regular radiator neck on this deal....
  10. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    It's both actually It pushes thru the hose into the radiator out the overflow onto the ground
  11. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    There is piping (small hose) between the heads for coolant. I have seen no evidence of leakage.
  12. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    That's what prompted me to post and ask as this tractor has no radiator cap The factory radiator has a screw in plastic fill plug on the radiator top, with an overflow tube separate from it out the side of the top radiator tank to a factory plastic overflow tank that has a plastic lid similar to...
  13. motoOzarks

    Case 1690 pushing coolant out radiator

    There is no telling what has been done to it or what has happened All these are getting long in the tooth at this point.......
  14. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    It does not look like it has had any recent work on the heads or otherwise.
  15. motoOzarks

    Case 1690 David Brown pushing coolant out upper hose

    I'm hoping since it had nice green antifreeze that it's not a freeze damage issue.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top