Recent content by Moyfully

  1. M

    JD 8200 discs

    Turns out I ordered the AM12410 from a third party website and they sent me a different disc. I went to my local JD dealer this afternoon and their AM12410 fits like a glove. Thanks for all of the help.
  2. M

    JD 8200 discs

    Thanks for the reply. I tried the AM12410 directly from JD a few weeks ago but no dice. And you are correct, the mounting slot is more rectangular than square. I'm going to try to contact Burrell's to see if they might have some or have an answer.
  3. M

    JD 8200 discs

    I did some additional digging and found some mentions on other forums of a Shoup part number GD12410 that seems to have promise. Shoup no longer lists the part on their website but it was available in a 2018 catalog of theirs that I found an archive of and appears to be the right assembly...
  4. M

    JD 8200 discs

    I am still struggling to find the right replacement. I took the opener arm off yesterday to get a better look. Attached is a photo of the bore on the arm and also photos of the hub. The diagrams for the AM12410 that Tx Jim posted and that are on the JD website indicate that it has the same kind...
  5. M

    JD 8200 discs

    Hello, I have a John Deere 8200 grain drill that came with the property I bought. I’m having trouble finding discs that work with it. I’ve purchased a few from John Deere and none attach in the same way as the old ones. Photos of the old ones are attached. They are quite worn and measure about...
  6. M

    Ford 5000 CAV Pump & Starting Troubles

    Removed the left side of the pump and this is clearly out of whack. Now watching the Bundy Bears strip down video to try to figure out how to correct. Edit: never mind. Figured it would have been symmetrical. Edit 2: Going to remove the pump from the tractor and try to give it the full...
  7. M

    Ford 5000 CAV Pump & Starting Troubles

    Thank you, Dieseltech. I did confirm that I don’t have an extra upper o-ring in there on my WIX filter. It did run well right after I changed that filter a few weeks ago. I took off the top of the pump and checked to see if anything was stuck in there and everything moved easily. Went ahead...
  8. M

    Ford 5000 CAV Pump & Starting Troubles

    Happy Easter. Unfortunately not looking like it was just the battery. After trying to start this morning after a full charge overnight I looked at each fuel injection line and noticed the line closest to the dashboard and second lowest on the fuel pump (I think #4, the one with the fewest...
  9. M

    Ford 5000 CAV Pump & Starting Troubles

    Good afternoon. Seems like it was most likely the few week old Interstate battery. I picked up a comparable one from a different brand this afternoon and wired it up. Was able to get my normal starting speed and was able to bleed out at least 3 of the 4 injector lines that I hadn’t been able to...
  10. M

    Ford 5000 CAV Pump & Starting Troubles

    Good morning. Just tried cranking for the first time this morning. Barely got anything moving cranking it. Replaced battery connections yesterday and they are tight. Also cleaned the connections on the other ends of the connections from the battery. It read 12.05V after charging overnight...
  11. M

    Ford 5000 CAV Pump & Starting Troubles

    Thanks for all of these responses. I spent this afternoon trying again. I was able to get a good amount of smoke out on my first crank of the day after taking apart and cleaning the parts attached to the end of the shut-off cable on the pump. It does have an oddity where it moves up or down and...
  12. M

    Ford 5000 CAV Pump & Starting Troubles

    Thank you. I just tried giving it a final start for the night before seeing your response and on a (reading full) battery didn’t get a full speed start with the fan not moving at it’s typical speed. Hoping the starter isn’t shot and will give it a fresh try in the morning after a night of...
  13. M

    Ford 5000 CAV Pump & Starting Troubles

    Thanks for the quick response. Unfortunately, not for a week or so, so I am hoping to be able to do this myself (with help from the great YT community). What is particularly odd to me about this issue is that I had some trouble bleeding the lines immediately after replacing the fuel filter...
  14. M

    Ford 5000 CAV Pump & Starting Troubles

    Hello, I have a recently new to me 1973 Ford 5000. It had been running well with no issues after changing out all fluids and oil and fuel filters. In an effort to fix some fuel leaks around the injector lines, I took out the old lines, cleaned around the injectors, and replaced with a set from...
  15. M

    Ford 5000 Fuel Pump Identification

    Thank you. I really appreciate all of the help.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top